8MP IMX219 Cameras , Pan-Tilt-Zoom (PTZ) Camera
Arducam Pan Tilt Camera Bundle for Nvidia Jetson Xavier NX/Nano, 2 Two-DOF Platforms with 8MP IMX219 Cameras, with PTZ Control Board
- You’ll be Getting: A pan tilt bracket kit, 2 digital servo motors, a PTZ controller board (with jumper wires).
- Pan Tilt Kit: Free panning and tilting in a smaller PT bracket. Specifically designed for a broader view on Raspberry Pi camera projects. PWM controller board included.
- Mini Digital Servos: Two GH-S37D digital servos for a faster speed, higher torque …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam 8MP Synchronized Stereo Camera Bundle Kit for Raspberry Pi
- Check Jetson Nano version SKU: B0217J8
- This bundle includes an Arducam stereo camera HAT, an 8MP IMX219 stereo camera board, and ribbon cables to connect them.
- The stereo camera HAT allows you to use two Raspberry Pi cameras simultaneously on a single CSI-2 slot.
- The stereo camera board frees you of any soldering in setting up your stereo …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano
- More Than HD: This camera adopts 1/4” 8 Megapixel IMX219 sensor for sharp image, Max. still resolution is 3280 x 2464 pixels.
- Wider Angle of View: This camera module has 175°(D) wide-angle M12 Lens, which provides a much wider Field of View compared to the stock lens on V2 camera module.
- Frame Rates: …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Auto Focus Camera Module, drop-in replacement for Raspberry Pi V2 and NVIDIA Jetson Nano Camera
- An autofocus replacement for your Raspberry Pi camera V2 to see in a much clearer way. Also support keyboard manual focus control without adjustment tool.
- SEE NATURALLY: 8MP IMX219 sensor drop-in replacement module for your Raspberry Pi Camera Module V2 and NVIDIA Jetson Nano, works natively compatible with the Raspberry Pi
- SEE CLOSER: Software-controllable moveable Lens. See …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Low Distortion M12 Mount Camera Module, drop-in replacement for Raspberry Pi V2 Camera and NVIDIA Jetson Nano
- Note: This is a low-distortion lens-sensor IMX219 replacement to be installed on the Raspberry Pi camera module V2 and Nvidia Jetson Nano, which are NOT included in the package. Make sure you have the camera board before purchasing
- Easy installation: Just detach the original stock IMX219 module onboard and re-attach this replacement gently and carefully, you can …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Wide Angle Camera Module, drop in replacement for Raspberry Pi V2 and Nvidia Jetson Nano Camera
- Note: A wide-angle lens-sensor IMX219 replacement to be installed on the Raspberry Pi camera module V2 and Nvidia Jetson Nano, which is NOT included in the package. Make sure you have the camera board before purchasing it.
- Easy installation: Just detach the original stock IMX219 module onboard and re-attach this replacement gently and carefully, …
8MP IMX219 Cameras , Camera Cables
Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space and Spy Camera Project, Work with V2 Camera on Jetson Nano
- This Sensor extension cable is to extend the IMX219 sensor and fit into the space-constrained environment. It can also be used on the Nvidia Jetson Nano.
- Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our …
8MP IMX219 Cameras
Arducam offers customized 8MP Pi cameras with M12 or CS mounts lens. You can also try our drop-in replacements for the official Raspberry Pi Camera V2, which give you a smooth upgrade to your Pi camera V2, either with autofocus features or M12 lenses.
Showing all 12 results
