It was impossible to use a non-IMX219 cam like RPI V1.3 on Jetson Nano, but not anymore. Note: Arducam has upgraded and rebranded the Project Jetvariety. Here is the latest post Arducam has updated Jetvariety, the project to increase MIPI Cameras for Jetson Nano and...
Table Of ContentsNvidia Jetson Nano Has Updated Its HardwareWhy the Update?Specifications of The New Dev Kit Module & Carrier BoardMain specification for new Jetson Nano Kit (PN: P3450)Jetson Nano B01 vs A02: ChangesHighlight of B01 Update: The 2nd camera...
After proving the feasibility to use Arducam Stereo Camera HAT for depth mapping on the Raspberry Pi, we’ve moved on to the Jetson Nano platform. This blog mainly discusses the application on the Jetson Nano A02, which only offers a single CSI port like the standard...
When it comes to developing a camera-related project on embedded systems like the Raspberry Pi (RPi) or NVIDIA Jetson Nano (NJN), we will take many factors into consideration. To help you better select a camera module, here is a quick start guide from Arducam....
Update: The Two MIPI-CSI Connectors on The New Jetson Nano Carrier Board (Rev B01 Kit) Are not Technically Synchronized Although recently NVIDIA has released a new revision of Jetson Nano board B02 with two camera slots, we found that it’s not a perfect upgrade....
Things to know about using multiple cameras on Jetson Nano The Nvidia Jetson series is known for its extraordinary performance in artificial intelligence with a small form factor. Since the Jetson TX1/TX2 could be too expensive to become popular among hobbyists, the...
Here are our forum rules to comply with if you want to post a new topic:
Arducam posting rules
The posting rules aim to help you better articulate your questions and be descriptive enough to get help.
Any topic that fails to comply with the posting rules will be unapproved starting from 11/11/2020.
This forum is public. If you prefer a private conversation with Arducam, go to our Contact Center.
If you need help with the Arducam products you’ve purchased, please include the following questions in your post and answer them to help us better understand your needs.
Which seller did you purchase the product(s) from? (Is it Amazon, UCTRONICS, or other Arducam distributors?)
What’s the Model number of the product(s) you’ve purchased? (If you don’t know the model number, show us the link to the product.)
Which Platform are you using the product(s) on? (Is it a Raspberry Pi 3B+/4B, Arduino UNO R3, Jetson Nano B01, or another host?)
Which instruction are you following? (Is it our paper instruction manual, online documentation, or video tutorial? A link will Help.)
Has your product ever worked properly? (Never worked, quit working, or work intermittently)
What problems are you experiencing? (pictures and error codes will help a lot)
What attempts at troubleshooting have you already made?