raspberry pi camera Archives

Cameras for RaspberryPi , MIPI Camera Modules
Arducam OV9281 1MP Mono Global Shutter Camera with 130deg 850nm Only M12 Mount for Raspberry Pi
- Monochrome global shutter Camera Module with M12 Mount lens directly inserts to CSI slot on Raspberry Pi. Support Raspberry Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and more.
- Supported By The Lastest Official Firmware: The Raspberry Pi has recently updated its firmware with V4L2 camera drivers, which adds support including for OV9281. Thus this OV9281 camera module is compatible with the …
Cameras for RaspberryPi , MIPI Camera Modules
Arducam OV7251 0.31MP Monochrome Global Shutter Camera Module for Raspberry Pi NoIR
- Supported By The Lastest Official Firmware: The Raspberry Pi has recently updated its firmware with V4L2 camera drivers, which adds support including for OV7251. Thus this OV7251 camera module is compatible with the official V4L2 camera driver, and you can get it working easily just by enabling the overlay. NOTE: Raspberry Pi motherboard is not included …
Cameras for RaspberryPi , MIPI Camera Modules
Arducam OV9281 1MP Global Shutter NoIR Mono Camera with 130deg M12 Mount for Raspberry Pi
- Check Jetson Nano version SKU: B0223
- Monochrome global shutter Camera Module with M12 Mount lens directly inserts to CSI slot on Raspberry Pi. Support Raspberry Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and more.
- Supported By The Lastest Official Firmware: The Raspberry Pi has recently updated its firmware with V4L2 camera drivers, which adds support including for OV9281. Thus this …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam 8MP Synchronized Stereo Camera Bundle Kit for Raspberry Pi
- Check Jetson Nano version SKU: B0217J8
- This bundle includes an Arducam stereo camera HAT, an 8MP IMX219 stereo camera board, and ribbon cables to connect them.
- The stereo camera HAT allows you to use two Raspberry Pi cameras simultaneously on a single CSI-2 slot.
- The stereo camera board frees you of any soldering in setting up your stereo …
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Auto Focus Camera Module, drop-in replacement for Raspberry Pi V2 and NVIDIA Jetson Nano Camera
- An autofocus replacement for your Raspberry Pi camera V2 to see in a much clearer way. Also support keyboard manual focus control without adjustment tool.
- SEE NATURALLY: 8MP IMX219 sensor drop-in replacement module for your Raspberry Pi Camera Module V2 and NVIDIA Jetson Nano, works natively compatible with the Raspberry Pi
- SEE CLOSER: Software-controllable moveable Lens. See …
Cameras for RaspberryPi , Multiplexers and Stereo HAT
Synchronized Stereo Camera HAT for Raspberry Pi
A truly synced stereo camera HAT that lets you use 2 Raspberry Pi cameras on a single CSI port on a single Raspberry Pi camera. Arducam proprietary.
Cameras for RaspberryPi , Multiplexers and Stereo HAT
Arducam Multi Camera Adapter Doubleplexer Stereo Module V2 for Raspberry Pi Zero, Pi 4/3B+/3
- This multi-camera adapter board is designed for Raspberry pi ZERO and lets you connect two 5MP or 8MP cameras to Pi Zero.
- Only one of the two cameras can be activated at a time, and they are working in alternate ways.
- A simple software built to run two cameras and make it looks like working at the same time.
8MP IMX219 Cameras , Cameras for RaspberryPi
Arducam IMX219 Wide Angle Camera Module, drop in replacement for Raspberry Pi V2 and Nvidia Jetson Nano Camera
- Note: A wide-angle lens-sensor IMX219 replacement to be installed on the Raspberry Pi camera module V2 and Nvidia Jetson Nano, which is NOT included in the package. Make sure you have the camera board before purchasing it.
- Easy installation: Just detach the original stock IMX219 module onboard and re-attach this replacement gently and carefully, …
8MP IMX219 Cameras , Camera Cables
Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space and Spy Camera Project, Work with V2 Camera on Jetson Nano
- This Sensor extension cable is to extend the IMX219 sensor and fit into the space-constrained environment. It can also be used on the Nvidia Jetson Nano.
- Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our …
5MP OV5647 Cameras , Cameras for RaspberryPi
Arducam Auto Focus Camera, Autofocus for Raspberry Pi Camera Module, Motorized Focus Lens, OV5647 5MP 1080P, Compatible with Pi 4/3B+/3
- SEE CLOSER: Software-controllable moveable Lens. Shoot objects in millimeter level and in the distance on the same camera, remotely controlled without lens adjustment tool, closer and easier than the fixed focus (1 m to infinity) official Raspberry Pi Camera Module V2
- SEE SMARTER: Thanks to the motorized lens and the Autofocus python scripts …
Cameras for RaspberryPi , Multiplexers and Stereo HAT
Arducam Multi Camera Adapter Module V2.2 for Raspberry Pi 4 B, 3B+, Pi 3, Pi 2, Model A/B/B+, Work with 5MP / 8MP / High Quality Cameras
- Designed for connecting up to 4 5MP, 8MP, 12.3MP cameras (or any Arducam Pi cameras) to a single CSI camera port on an RPi board.
- Support Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 4, 3,3b+.
- Accommodate up to four 5MP or 8MP Raspberry Pi cameras on a multi-camera adapter board.
- All camera ports are FFC (flexible …
Cameras for RaspberryPi , MIPI Camera Modules
Arducam OV9281 1MP Monochrome Global Shutter Camera Module with M12 Mount lens for Raspberry Pi 4/3B+/3
- Monochrome global shutter Camera Module with M12 Mount lens directly inserts to CSI slot on Raspberry Pi. Support Raspberry Pi 4, Pi 3/3B+/3A+, CM3/3+, Pi Zero and more.
- Supported By The Lastest Official Firmware: The Raspberry Pi has recently updated its firmware with V4L2 camera drivers, which adds support including for OV9281. Thus this OV9281 camera module is compatible with the …