Arducam OV9281 1MP Global Shutter NoIR Mono MIPI Camera with 130deg M12 Mount for Raspberry Pi

Check Jetson Nano version SKU: B0223

Note:This camera and RPI driver doesn’t support ISP functions like AEC/AGC etc. Arducam SDK for this camera supports RAW/JPEG/H.264 format, and manual or software auto exposure/gain/white balance.

SKU: B0224 Category:

Description

Item Description:

Arducam global shutter monochrome (B&W) 1280×800 resolution OV9281 MIPI camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware. This camera is based on 1/4-inch Omnivision OV9281 image sensor which adopts OmniPixel3-GS™ technology to provide full-frame, sub-sampled, and windowed 8/10-bit MIPI images, and capable of operating at up to 120fps in full resolution at 1-lane MIPI bus with complete user control over image quality.
The sensor’s global shutter and excellent low-light sensitivity allow it to be used for any application that needs gesture detection, head and eye tracking, and depth and motion detection.

Key Specifications:

  • Sensor: Monochrome global shutter OV9281
  • Pixel Size: 3 μm x 3 μm
  • Active array size: 1280 x 800
  • Optical Size: 1/4 inch
  • Focusing Range: 30mm ~ infinite
  • Output interface: 2-lane MIPI serial output
  • Output formats: 8/10-bit BW RAW
  • Maximum image transfer rate: 1280 x [email protected] fps
  • Board Size: 40mm x 40mm
  • Lens FoV: 130°(D)/110°(H)/90°(V)
  • IR Sensitivity: sensitive to IR, No IR filter

Application:

  • Security
  • High dynamic range imaging
  • Unattended surveillance
  • Stereo vision
  • Machine vision
  • Automation

Package Including:

  • 1pcs Arducam OV9281 1MP Mono Global Shutter MIPI Camera with 130deg M12 Mount Lens
  • 1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
  • 1pcs 80mm 22pin 0.5mm pitch FPC cable

Additional Resources:

Reviews

There are no reviews yet.

Be the first to review “Arducam OV9281 1MP Global Shutter NoIR Mono MIPI Camera with 130deg M12 Mount for Raspberry Pi”

Your email address will not be published. Required fields are marked *