- Arducam IoTai is based on the ESP-32S module, uses onboard 4MByte PSRAM and 2MP OV2640 camera module, which makes it possible to capture and process the image.
- Fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, supports both Arduino IDE and ESP-IDF software development tools and keeps the same form of factors and pinout …
Arducam IMX219 Low Distortion M12 Mount Camera Module for NVIDIA Jetson Nano and Raspberry Pi Compute Module
An 8MP IMX219 camera for Nvidia Jetson Nano with an M12 lens which is low distortion (<3%). Work with Raspberry Pi Compute module but not standard Pi models
Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera Specific (Pack of 2, 1 Set)
- This Arducam CSI to HDMI Cable Extension Module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1 and V2 cameras
- By using high-speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras
- In addition to extend the camera signal, the …
Arducam IMX219 Wide Angle Camera Module, drop in replacement for Raspberry Pi V2 and Nvidia Jetson Nano Camera
- Note: A wide-angle lens-sensor IMX219 replacement to be installed on the Raspberry Pi camera module V2 and Nvidia Jetson Nano, which is NOT included in the package. Make sure you have the camera board before purchasing it.
- Easy installation: Just detach the original stock IMX219 module onboard and re-attach this replacement gently and carefully, …
B0185 Arducam IMX219 8MP Spy Camera with 300mm Extension Cable for Nvidia Jetson Nano and Compute Module. It could be used in space constraint applications like through a hole or a tube or wearable devices.
Autofocus 8MP IMX219 Module (Visible light only), mainly designed for the NVIDIA Jetson nano. Work with Raspberry Pi compute module but not other standard Raspberry Pi models.
Autofocus 8MP IMX219 Module (IR sensitive), mainly designed for the NVIDIA Jetson nano. Work with Raspberry Pi compute module but not other standard Raspberry Pi models.
Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space and Spy Camera Project, Work with V2 Camera on Jetson Nano
- This Sensor extension cable is to extend the IMX219 sensor and fit into the space-constrained environment. It can also be used on the Nvidia Jetson Nano.
- Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our …
Arducam IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module
B0191 Arducam IMX219 Visible Light Fixed Focus Camera Module for Nvidia Jetson Nano and Raspberry Pi Compute Module
Arducam Auto Focus Camera, Autofocus for Raspberry Pi Camera Module, Motorized Focus Lens, OV5647 5MP 1080P, Compatible with Pi 4/3B+/3
- SEE CLOSER: Software-controllable moveable Lens. Shoot objects in millimeter level and in the distance on the same camera, remotely controlled without lens adjustment tool, closer and easier than the fixed focus (1 m to infinity) official Raspberry Pi Camera Module V2
- SEE SMARTER: Thanks to the motorized lens and the Autofocus python scripts …
Arducam Multi Camera Adapter Module V2.1 for Raspberry Pi 4 B, 3B+, Pi 3, Pi 2, Model A/B/B+, Work with 5MP or 8MP Cameras
- Designed for connecting up to 4 5MP or 8MP cameras to a single CSI camera port on an RPi board.
- Support Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 4, 3,3b+.
- Accommodate up to four 5MP or 8MP Raspberry Pi cameras on a multi-camera adapter board.
- All camera ports are FFC (flexible flat cable) connectors, Demo: youtu.be/DRIeM5uMy0I
- Cameras …
Arducam OV9281 MIPI 1MP Monochrome Global Shutter Camera Module with M12 Mount lens for Raspberry Pi 4/3B+/3
Monochrome global shutter MIPI Camera Module with M12 Mount lens directly inserts to CSI slot on Raspberry Pi.
All Arducam Products
Showing 37–48 of 134 results