Arducam 12MP Multi-Camera Kit for NVIDIA Jetson AGX Orin
SKU
B0473
- Designed for the NVIDIA Jetson AGX Orin Dev kit
- Based on 12MP 477 CMOS
- Built-in ISP image processing
- Support up to 6 cameras at the same time
- All 6 cameras support video streaming individually
$249.00
Overview
Specifications
Wiki
Documents
Video
Customization
Overview
Arducam 12MP Camera Kit - A multi-camera solution designed for the NVIDIA Jetson AGX Orin. The kit comes with 6 × 12 MP camera modules with case, 6 × 30cm 15-22pin FPCs, 1× camera adapter with 6 CSI-2 interfaces.
A distinctive feature of the AGX Orin is its lack of a native camera interface. Recognizing this gap, we present this innovative camera adapter board. Outfitted with 6 CSI-2 15pin connectors, and this adapter empowers you to seamlessly integrate up to 6 camera modules. A remarkable advantage of this multi-camera setup is the independent operation of each camera module. Please note that these modules must be of the same model and cannot be mixed to ensure optimal performance.
This breakthrough engineering ensures that you can harness the full potential of each camera module simultaneously, capturing diverse perspectives and enhancing your project's scope.
Applications
- Machine Vision
- Automated Optical Inspection
- 3D Scanning and Metrology
- Robotics and Automation
- Biomedical Imaging
Specifications
| Camera | |
| Still Resolution | 12.3 Megapixels |
|---|---|
| Video Modes | L4t 32.x: 4032x3040@30fps, 3840x2160@30fps, 1920x1080@60fps L4t 35.x: 4032x3040@20fps, 3840x2160@30fps, 1920x1080@60fps |
| Sensor Resolution | 4056 x 3040 pixels |
| Sensor image area | 6.287mm x 4.712 mm (7.9mm diagonal) |
| Pixel Size | 1.55 µm x 1.55 µm |
| Optical Size | 1/2.3" |
| IR Sensitivity | Integral IR-Cut Filter, visible light only |
| Lens | |
| Focus Type | Fixed Focus |
| FOV | 120°(D) |
| Lens Type | Stock Lens |
| F.NO | F2.8 |
| E.F.L | 2.75mm |
| Electrical & Mechanical | |
| Camera Board Size | 25 × 24 mm |
| Peaking Current | 300mA |
Package Including
- 6 x 12MP Camera Module with Case
- 6 x 30cm 15-22pin FPC
- 1 x Camera Adapter for NVIDIA Jetson AGX Orin
- 1 x Screw Pack
Note
- For NVIDIA Jetson Official Developer Kits only, third-party carrier boards are not supported.
- The camera kit supports JetPack 5.1.1/L4T 35.3.1 and above. Additional driver configuration is required before use, see the below documentation for details.
Documentation
Customization
About Arducam's Customization Services:
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
What can Arducam customize?
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design