Description
NOTE:
This camera is released for official Jetson Nano/Xavier NX boards. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+) , but it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.
Item description:
This Arducam IMX219 camera module is mainly designed for NVIDIA® Jetson Nano and also can be used on other hardware like ARM, DSP, FPGA, etc. The highlight of this camera is its wide field of view.
Features:
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: [email protected], [email protected], [email protected]
- Data Format: RAW8/RAW10
- EFL: 2.5mm
- F.NO: 2.8
- Focus Type: Fixed Focus
- View Angle: 175(D) x 155(H) x 115(V)
- Interface: MIPI CSI-2 2-lane/4-lane
- IR Sensitivity: Integral IR Filter, visible light only
Package includes:
- 1pcs Arducam IMX219 Wide Angle Camera Module for NVIDIA Jetson Nano
- 1pcs 1.0mm pitch 15cm 15pin FPC cable
Documentation:
Used on Jetson
IMX219 – 8MP Camera
Introduction IMX219 is a 1/4″ 8MP MIPI CSI-2 image sensor, it was adopted by the Raspberry pi V2 camera module back in 2016. Now the IMX219 camera is natively supported by the Jetson Nano and Read more…
 Datasheet.pdf 3D drawing.step |
Blog
Arducam Introduces 8MP IMX219 Auto Focus, Wide Angle, Zero-Distortion and Spy Camera to the NVidia Jetson Nano
NVIDIA JETSON NANO AND ITS CAMERAS The Jetson Nano is a powerful single-board computer from NVidia. Featuring the extraordinary GPU performance, this NVidia development board is widely used in image processing applications like motion-tracking, face Read more…
Video
Lens options
| SKU | Format | FOV on 1/4” sensor | Focal Length |
| LN006 | 1/4’’ | 100° | 1.8mm |
| LN008 | 1/2.5’’ | 140° | 1.56mm |
| LN011 | 1/2.5’’ | 45° | 4mm |
| LN012 | 1/2.5’’ | 55° | 3.6mm |
| LN013 | 1/2.7’’ | 75° | 2.8mm |
| LN014 | 1/2.7’’ | 90° | 2.1mm |
| LN015 | 1/4’’ | 63° | 3.2mm |
How to purchase
You can purchase this item from Arducam distributors
