Arducam 18MP AR1820HS Color Camera Module for Jetson Nano

  • Check Raspberry Pi version SKU: B0164
  • High Resolution
  • Platform Support: Jetson Nano
  • Support RAW8/10 bayer format
  • Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
  • Support Single Line Driver Installation Command
  • Support OpenCV Friendly and Provides Source Code Demonstration
SKU: B0216 Category:
SKU: B0216 Category:

Description

Item Description:

 

As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 18MP AR1820HS camera module for Jetson Nano. It incorporates ON Semiconductor 1/2.3−inch CMOS active−pixel digital imaging sensor AR1820HS with 1.25um x 1.25um A-PixHS™ BSI Pixel and can support 18-megapixel (4912H x 3684V) digital still images at 24 fps and a 1080p plus additional 27 percent pixels for electronic image stabilization (2448H x 1378V) in digital video mode at 60 fps and 1080p120 fps.

Features:

  • Optical format: 1/2.3−inch (4:3)
  • Active pixels: 4912H x 3684V
  • Pixel size: 1.25um x 1.25um
  • Color filter array: RGB Bayer pattern
  • ADC resolution: 12−bit, on−chip
  • Responsivity: 0.62 V/lux−sec (545 nm)
  • Dynamic range: 65.8 dB
  • SNRMAX: 36.3 dB
  • Output Interface: 2-Lane MIPI
  • Frame Rate: [email protected]×3684/2432×1842/1920×1080  (MIPI-2L), [email protected]×920, [email protected]×480
  • Lens: low distorion M12 lens (Part Number: M27280M07S) default
  • IR Sensitive: build-in 650nm IR filter, none sensitive to IR light

Driver Features:

  • Support RAW8/10 bayer format.
  • Support Standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
  • Support Single Line Driver Installation Command
  • Support OpenCV Friendly and Provides Source Code Demonstration

Application:

  • Digital video cameras
  • Digital still cameras
  • Industrial camera
  • Medical camera
  • Microscopy camera
  • UAV camera

Documentation

Jetvariety – MIPI Camera Modules for Jetson Nano/Xavier NX

Jetson Nano’s MIPI interface and MIPI connectors The Jetson Nano Developer Kit consists of two parts: The Computer on a Module (CoM), and the carrier board. The CoM supports high-speed MIPI interface, which is now Read more…

0 comments

Blog

arducam jetson nano camera general purpose solution blog thumbnail 215 187

Project Jetvariety: How Arducam Makes it Possible to Use Any Camera Module on the Jetson Nano with One Kernel Driver for All

Introducing Project Jetvariety – Increase the Jetson Nano Camera Variety Today we are proud to introduce the Project Jetvariety (short for Jetson variety), which aims to quickly increase the variety of Jetson Nano cameras with Read more…

16 comments

Video

How to purchase

You can purchase this item from Arducam distributors

Additional information

Interface

MIPI

IR sensitivity

IR Cut Switch

Resolution

18MP

Lens Mount

M12 Mount

Camera Driver

Arducam

Frame Rates

Others

Reviews

There are no reviews yet.

Be the first to review “Arducam 18MP AR1820HS Color Camera Module for Jetson Nano”

Your email address will not be published. Required fields are marked *

You may also like…