Arducam 13MP IMX135 Camera Module for Jetson Nano (Jetvariety RAW 13)

Buy Now

Check Raspberry Pi version SKU: B0163



As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam just released this high-quality camera module for Jetson Nano. This camera is based on a 1/3 inch Sony IMX135 image sensor which adopts Exmor-R™ technology to achieve high-speed image capturing with high sensitivity and low noise performance. “RGBW coding” color filter is employed and RGB primary color mosaic is reproduced on-chip. High sensitivity, low dark current, and smear-free features are achieved. It equips an electronic shutter with variable integration time.
This MIPI camera module can be used on other ARM, FPGA, DSP, or Nvidia TX1/TX2 hardware platform as well.


This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you may need to re-install a matching driver.


  • Cellular phones
  • PDAs
  • Toys
  • Other battery-powered products
  • ARM/FPGA/DSP based platforms


  • High Resolution
  • Platform Support: Jetson Nano
  • High sensitivity, low dark current, no smear, excellent anti-blooming characteristics
  • Programmable motorized focus lens
  • Support RAW8/10 bayer format
  • Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
  • Support Single Line Driver Installation Command
  • Support OpenCV Friendly and Provides Source Code Demonstration


  • Sensor Type: IMX135
  • Pixel Size: 1.12um x 1.12um
  • Optical Size: 1/3”
  • Lens Spec: Focal length: 3.85mm, F.NO: 2.0±5%, FOV: 60deg
  • Color Filter Array: RGB Bayer pattern
  • Frame Rate: [email protected] Mp full resolution, [email protected], [email protected]
  • Interface Type: 2-Lane /4-Lane MIPI
  • Output Format: RAW8/RAW10 output
  • Board Size: 40x40mm

Package Contents

  • 1pcs Arducam IMX135 13MP Color MIPI Camera Module
  • 1pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
  • 1pcs 80mm 22pin 0.5mm pitch FPC cable
  • 1pcs Arducam Adapter Board for Jetson Nano
  • Acrylic case for the camera module


Sensor Datasheet

Sensor Datasheet.pdf

Acrylic Bracket Assembly Guide

Acrylic Bracket Assembly Guide.pdf

Jetvariety – MIPI Camera Modules for Jetson Nano/Xavier NX

Jetson Nano’s MIPI interface and MIPI connectors The Jetson Nano Developer Kit consists of two parts: The Computer on a Module (CoM), and the carrier board. The CoM supports high-speed MIPI interface, which is now Read more…



arducam jetson nano camera general purpose solution blog thumbnail 215 187

Project Jetvariety: How Arducam Makes it Possible to Use Any Camera Module on the Jetson Nano with One Kernel Driver for All

Introducing Project Jetvariety – Increase the Jetson Nano Camera Variety Today we are proud to introduce the Project Jetvariety (short for Jetson variety), which aims to quickly increase the variety of Jetson Nano cameras with Read more…




ArduCAM/Jetson Nano

How to Purchase

You can purchase this item from Arducam distributors

Additional information

Focus Type


Camera Driver


Form Factor


Frame Rates




IR sensitivity

Visible Light

Lens Mount

Stock Lens



Shutter Type

Rolling Shutter


There are no reviews yet.

Be the first to review “Arducam 13MP IMX135 Camera Module for Jetson Nano (Jetvariety RAW 13)”

Your email address will not be published. Required fields are marked *