0.3MP: OV7675
It’s not just for this OV7675, we’ve also got a full collection of TinyML-ready, ultra low power camera modules for the Arduino Nano 33 BLE Sense.
And also a brand new, open source RP2040 development board with everything you need for Tiny machine learning!
And we also have a USB 3.0 quick development and evaluation board for sensors like OV7675.
Key Feature
- active array size: 640×480
- power supply:
analog: 2.6 ~ 3.0V
core: 1.5V DC + 5% (internal regulator)
I/O: 1.71 ~ 3.0V - power requirements:
active: 98 mW
standby: 60 μW - temperature range:
operating: -30°C to 70°C (see table 8-2)
stable image: 0°C to 50°C (see table 8-2) - output formats: YUV422, Raw RGB, ITU656, RGB565
- lens size: 1/9″
- input clock frequency: 1.5 ~ 27 MHz
- scan mode: progressive
- maximum image transfer rate: VGA 30fps, QVGA 60fps, QQVGA 240pfs
- sensitivity: 1800 mV/(Lux-sec)
- shutter: rolling shutter
- S/N ratio: 38 dB
- dynamic range: 71 dB
- maximum exposure interval: 510 x tROW
- pixel size: 2.5 μm x 2.5 μm
- image area: 1640 μm x 1220 μm
1 Comment
Yan Tang · June 3, 2019 at 5:33 pm
Hi there,
We are interested in OV7675 VGA CMOS camera module. Can you tell me
the part number of the 24pin mating connector and the length of the FFC cable.
Thank you for your help.
Regards,
Yan Tang, M.Sc, P.Eng
Design Engineer – Proxilogica Corporation
Email: [email protected]