Description
NOTE:
This camera is released for official Jetson Nano/Xavier NX boards. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+) , but it does not support the standard Raspberry Pi models (like Raspberry Pi 3/3B+/4) and other third-party boards.
Features
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Frame Rate: [email protected], [email protected], [email protected]
- Data Format: RAW8/RAW10
- EFL: 2.8mm
- F.NO: 2.8
- View Angle: 75 Deg. (Horizontal)
- Interface: MIPI CSI-2 2-lane
- IR Sensitivity: Visible light, Integral IR Filter
Application
- Unmanned Aerial Vehicles (UAVs)
- Building Drones
- Autonomous Robotic Systems
- Mobile Medical Imaging
- Intelligent Video Analytics (IVA)
Package Includes
- 1pcs Arducam IMX219 Low Distortioin Camera Module for NVIDIA Jetson Nano
- 1pcs 1.0mm pitch 15cm 15pin FPC cable
Documentation
Used on Jetson
IMX219 – 8MP Camera
Introduction IMX219 is a 1/4″ 8MP MIPI CSI-2 image sensor, it was adopted by the Raspberry pi V2 camera module back in 2016. Now the IMX219 camera is natively supported by the Jetson Nano and Read more…
 Datasheet.pdf |
Blog
Arducam Introduces 8MP IMX219 Auto Focus, Wide Angle, Zero-Distortion and Spy Camera to the NVidia Jetson Nano
NVIDIA JETSON NANO AND ITS CAMERAS The Jetson Nano is a powerful single-board computer from NVidia. Featuring the extraordinary GPU performance, this NVidia development board is widely used in image processing applications like motion-tracking, face Read more…
Video
GitHub
ArduCAM/Nvidia_JetsonLens options
| SKU | Format | FOV on 1/4” sensor | Focal Length |
| LN006 | 1/4’’ | 100° | 1.8mm |
| LN008 | 1/2.5’’ | 140° | 1.56mm |
| LN011 | 1/2.5’’ | 45° | 4mm |
| LN012 | 1/2.5’’ | 55° | 3.6mm |
| LN013 | 1/2.7’’ | 75° | 2.8mm |
| LN014 | 1/2.7’’ | 90° | 2.1mm |
| LN015 | 1/4’’ | 63° | 3.2mm |
How to purchase
You can purchase this item from Arducam distributors
