Arducam 2MP OV2311 Global Shutter Mono NoIR Camera Module for Jetson Nano

Check Raspberry Pi version SKU: B0218

SKU: B0220 Category:

Description

Item Description:

As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 2MP Global shutter OV2311 camera module, and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware. Based on 1/2.9-inch Omnivision OV2311 image sensor which adopts OmniPixel3-GS™ technology, it can provide full-frame, sub-sampled, and windowed 8/10-bit MIPI images, and capable of operating at up to 60fps in full resolution at 2-lane MIPI bus with complete user control over image quality.

Due to the sensor’s high resolution, the OV2311 offers exceptionally accurate gaze- and eye-tracking capabilities, and it achieves high near-infrared quantum efficiency to minimize active illumination power and reduce the system power requirements.

Features:

  • Sensors
  • Sensor: Global Shutter OV2311 Monochrome
  • Pixel size: 3 µm x 3 µm
  • Active array size: 1600 x 1300
  • Optical Format size: 1/2.9″
  • Maximum image transfer rate: 1600 x 1300: 60 fps
  • Support for image sizes: 1600 x 1300, 1280 x 720, 640 x 480
  • Input clock frequency: 6~27 MHz
  • Max S/N ratio: 37.4 dB
  • Dynamic range: 68 dB
  • Lens
  • Lens Thread: M9 x 0.25P
  • Lens Field of View(FoV): 55°(H)
  • IR Sensitivity: without IR filter, sensitive to IR
  • Camera Module
  • Output interface: 2-lane MIPI
  • Output formats: RAW 8/10 bit

Driver Features:

  • Support Gray, Y10, Y16
  • Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
  • Support External Trigger Global Shutter Camera
  • Support Single Line Driver Installation Command
  • Support OpenCV Friendly and Provides Source Code Demonstration
  • Support Dual Camera Synchronization

Applications:

  • Augmented and virtual reality
  • Drones
  • 3D imaging
  • Machine vision
  • Industrial bar code scanning
  • Industrial automation

Documentation

MIPI Camera Modules for Jetson Nano

Jetson Nano’s MIPI interface and MIPI connectors The Jetson Nano Developer Kit consists of two parts: The Computer on a Module (CoM), and the carrier board. The CoM supports high-speed MIPI interface, which is now Read more…

0 comments

Blog

arducam jetson nano camera general purpose solution blog thumbnail 215 187

Project Jetvariety: How Arducam Makes it Possible to Use Any Camera Module on the Jetson Nano with One Kernel Driver for All

Introducing Project Jetvariety – Increase the Jetson Nano Camera Variety Today we are proud to introduce the Project Jetvariety (short for Jetson variety), which aims to quickly increase the variety of Jetson Nano cameras with Read more…

13 comments

Video

How to purchase

You can purchase this item from Arducam distributors

Additional information

Focus Type

Fixed

Interface

MIPI

IR sensitivity

Visible Light

Resolution

1-2MP

Shutter Type

Global Shutter

Lens Mount

Stock Lens

Camera Driver

Arducam

Frame Rates

120fps

Reviews

There are no reviews yet.

Be the first to review “Arducam 2MP OV2311 Global Shutter Mono NoIR Camera Module for Jetson Nano”

Your email address will not be published. Required fields are marked *

You may also like…