Arducam 5MP OV5642 1080P Camera Module JPEG Output

Buy Now

 

5MP OV5642 1080P.RAW,RGB,YUV,JPEG output support.

Description

Features

  • Onboard LDO regulators for 2.8V and 1.8V
  • Single 3.3V power input
  • 2.54mm (0.1 inch) standard pin out
  • active array size: 2592 x 1944
  • power supply:
  • core: 1.5VDC + 5% (internal regulator)
  • analog: 2.6 ~ 3.0V
  • I/O: 1.7 ~ 3.0V
  • output formats :
  • (8-bit): YUV(422/420) / YCbCr422,
  • RGB565/555/444, CCIR656,
  • 8-bit compression data,
  • 8/10-bit raw RGB data
  • lens size: 1/4″
  • input clock frequency: 6 ~ 27 MHz
  • shutter: rolling shutter
  • maximum image transfer rate:
  • 5 megapixel (2592×1944): 15 fps (and any size scaling down from 5 megapixel)
  • 1080p (1920×1080): 30 fps
  • 720p (1280×720): 60 fps
  • VGA (640×480): 60 fps
  • QVGA (320×240): 120 fps
  • scan mode: progressive
  • pixel size: 1.4 µm x 1.4 µm
  • image area: 3673.6 µm x 2738.4 µm
  • RAW,RGB,YUV,JPEG output support
  • External 1/4 inch high quality M12x0.5 lens
  • Lens Specification: sensor size: 1/2.7″; EFL:4mm; F/N:1.8; BFL:6.68mm; HFOV: 56 degree  (SKU: U1462)

      Note: If you would like to change the lens, please choose the lens from the M12 lens kit here:

      SKU: LK001 Arducam M12 mount camera lens kit for Arduino and Raspberry Pi camera

      SKU: LK002 Arducam Low Distortion M12 mount camera lens kit for Arduino and Raspberry Pi camera

    Pin Out:

    Application:

    • image acquisition
    • Enviornment monitor
    • Inductrial cameramachine vision flow detection
    • medical endoscope
    • video telephone
    • safety guard alarm system
    • door bell camera and video door bell
    • vehicle monitoring
    • romote monitor and control
    • digital image record
    • 3D scanner printer
    • intelligent toys

    Package including:

    • 1pcs 5 Mega pixel Camera Module OV5642 

    Documentation

    5MP OV5642

    Introduction Arducam OV5642 camera breakout incorporates Omnivision 1/4−inch CMOS active−pixel digital imaging sensor OV5642 with an active pixel array of 2592×1944. The entire system-on-a-chip (SOC) has onchip AEC/AGC/AWB etc ISP functions, and supports RAW/YUV/RGB/JPEG different Read more…

    Camera Breakout Board Introduction

    Arducam now offers the camera breakout boards for customers who want to build prototypes or put the boards into their products. Users don’t need to handle with the tiny and fine pin pitch camera module Read more…

    arducam-doc-logo-150-150

    User guide.pdf

    arducam-doc-logo-150-150

    Datasheet.pdf

    arducam-doc-logo-150-150

    Application note.pdf

    Blog

    New 5MP OV5642 Camera Module (support JPEG output)

    Key specifications active array size: 2592 x 1944 power supply: core: 1.5VDC + 5% (internal regulator) analog: 2.6 ~ 3.0V I/O: 1.7 ~ 3.0V output formats : (8-bit): YUV(422/420) / YCbCr422, RGB565/555/444, CCIR656, 8-bit compression Read more…

    6 comments
    usb3_camera_shield_blog_thumbnail

    Arducam USB3.0 Camera Shield

    Introduction Arducam USB3 camera shield is the latest USB3.0 camera shields, it offers the improved performance and enhanced functions than the previous USB2.0 camera shield. It not only supports high resolution and high frame rate Read more…

    How to purchase

    You can purchase this item from Arducam distributors

    Additional information

    Lens Mount

    M12 Mount

    Shutter Type

    Rolling Shutter

    Resolution

    5MP

    Interface

    DVP

    Frame Rates

    15fps

    Reviews

    There are no reviews yet.

    Be the first to review “Arducam 5MP OV5642 1080P Camera Module JPEG Output”

    Your email address will not be published. Required fields are marked *

    You may also like…