Arducam M12 mount camera lens kit for Arduino and Raspberry Pi camera
SKU
LK001
- 10 M12 Mount lens for Arduino and Raspberry Pi cameras, HFOV ranging from 10 to 200 degree
- Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is – we selected, tested and labeled a bunch of lenses and shrinks it all into a complete toolbox on your palm
- What’s in it: This kit includes 10 M12 Lenses to cover almost any angles of view you’ll ever need, 10°/20°/40°/60°/80°/100°/120°/140°/160°/200° respectively on a 1/4” Pi Camera like OV5647 and IMX219. M12 lens holders, screws, specifications and even cleaning cloth are also in the box
- What else is needed: It makes a perfect combo with “Arducam B0031”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this kit directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
- How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera. Replace it with the next if it is not the best. Video: youtu.be/23jE0l8PTKA
- NOTE: The 4 lens holders included come with 18mm/20mm hole spacing and 7mm/13mm heights. Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all. Arducam CS Mount Cameras also work with this kit with holders replaced
$89.99
Overview
Specifications
Wiki
Documents
Video
Customization
Overview
- 10 M12 Mount lens for your Arduino and Raspberry Pi cameras, HFOV ranging from 10 to 200 degree
- Compatible with Arducam cameras with M12 Mount, B0067, B0068, B0031 recommended
- Selected and tested lenses with labeled caps, much easier for you to select the best lens you need
- 4 M12 lens holders with 18mm and 20mm hole spacing, 2 heights in metal and plastic
- Screws, specifications, and instructions for changing lens provided. Video: youtu.be/23jE0l8PTKA
In order to meet the increasing market demands for more lens options to address different use cases, Arducam selected and tested a wide range of M12 mount optimal lenses from long focus to fisheye for shooting on your Raspberry Pi or Arduino cameras. It’s now much easier for you to get the best lens you’ll need, and we will keep the lens list growing in the near future
Package Including:
- 1pcs Arducam M12 mount camera lens kit
How to purchase
You can purchase this item from Arducam distributors or Arducam's Amazon store
Customization
About Arducam's Customization Services:
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
What can Arducam customize?
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design