Description
Overview
A NoIR version of the 16MP camera module, with a fixed focus lens.
Without the infrared filter, the IMX519 sensor on this camera is available for applications (night vision/monospectral/multispectral/hyperspectral/etc.) that require the capturing of a much wider spectrum.
We tested this camera with various bandpass filters:
Stills/videos taken under natural daylight will be heavily affected by infrared (see above video), if you don’t need IR sensibility, please get the standard 16MP-AF instead.
See the full list of our 16MP cameras >
Specifications
| Sensor | Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534) |
| Output | RAW10/8, COMP8 |
| Lens | f/1.75; EFL: 4.28 |
| Field of View(FOV) | 66°(H) x 49.5°(V) x 80°(D) |
| IR cut Filter | Without IR-cut filter, sensitive to infrared light |
| Video Modes | 1080p@30fps, 720p@60fps |
| Linux integration | V4L2 driver available |
| Ribbon Cable Length | 150mm |
| Frame Rate (NVIDIA Orin NX) | L4t 32.x: 4656×3496@10fps, 3840×2160@21fps, 1920×1080@60fps, 1280×720@120fps L4t 35.x: 4656×3496@9fps, 3840×2160@17fps, 1920×1080@60fps, 1280×720@120fps |
| Resolution & Frame Rate on Jetson | 4656×3496@10fps, 3840×2160@21fps, 1920×1080@60fps, 1280×720@120fps |
Note:
The lens on 16MP NoIR is fixed focus.
| Note for Supported Raspberry Pi Boards and OS | |||
|---|---|---|---|
| Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
| Raspberry Pi 5 | √ | ||
| Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | |
| Raspberry Pi CM3 / CM3+ / CM4 / CM5 (extra carrier board required) | √ | √ | |
Documentations
- 16MP NoIR Getting Started
- How to Use 16MP IMX519 Camera Module on Raspberry Pi
- 3D Drawing
- 16MP Common Issues & Fixes
- Using Autofocus Camera On OctoPrint (temp method)
Packing List
- 1 x Arducam 16MP NoIR Camera Module
- 2 x FPC Cables (15cm 15-22pin & 22-22pin)
Note:
**Get the camera enclosure here.
FaQs
