Arducam IMX135 MIPI 13MP Color Camera Module for Raspberry Pi 4/3B+/3

Overview

The Arducam 13MP MIPI camera module is mainly designed for Raspberry pi boards and it can be connected directly to RPi’s CSI-2 camera interface without additional hardware.

This camera is based on a 1/3 inch Sony IMX135 image sensor which adopts Exmor-R™ technology to achieve high-speed image capturing with high sensitivity and low noise performance. “RGBW coding” color filter is employed and RGB primary color mosaic is reproduced on-chip. High sensitivity, low dark current, and smear-free features are achieved. It equips an electronic shutter with variable integration time.

This MIPI camera module can be used on other ARM, FPGA, DSP, or Nvidia TX1/TX2 hardware platform as well.

Applications

• Cellular phones
• Toys
• PDAs
• Other battery-powered products
• ARM/FPGA/DSP based platforms

Features

• 1/3 inch Back-illuminated Sony Exmor-R sensor IMX135
• Support 13MP/1080p/720p resolution, RAW8/RAW10 output
• CSI-2 serial data output (MIPI 2Lane/4Lane selectable)
• 2-wire I2C communication for sensor register settings
• High sensitivity, low dark current, no smear, excellent anti-blooming characteristics
• Image compensation processing functions (defect correction, noise reduction)
• RGBW coding (R, G, B, and “White”(achromatic)) color filter and RGB primary color mosaic reproduction on chip
• Programmable motorized focus lens, FOV 60 degrees
• Support all series Raspberry pi boards

Package Including

• 1 pcs Arducam IMX135 MIPI 13MP Color Camera Module
• 1 pcs 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
• 1 pcs 80mm 22pin 0.5mm pitch FPC cable
• Note: This camera and RPI driver doesn’t support ISP functions like AEC/AGC etc., and does not support hardware JPEG/H.264 encoding.

Documentation

Blog

Camera Selection Guide