[Discontinued] Arducam 2MP Global Shutter OG02B10 Color Camera Modules with M12 lens for Jetson Nano
Visit the Arducam Store
Discontinued, check alternative item B0429.
Item Description:
As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Nano. Arducam released this 2MP OG02B10 Global shutter camera module, and it can be connected directly to Jetson Nano’s CSI-2 camera interface without additional hardware.
Based on 1/2.9-inch Omnivision OG02B10 image sensor which adopts OmniPixel3-GS™ technology, it provides full-frame, sub-sampled, and windowed 8/10-bit MIPI images, and capable of operating at up to 60fps in full resolution at 2-lane MIPI bus with complete user control over image quality.
Due to the sensor’s high resolution, the OG02B10 offers exceptionally accurate gaze- and eye-tracking capabilities, and it achieves high near-infrared quantum efficiency to minimize active illumination power and reduce the system power requirements.
⚠️ KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you may need to re-install a matching driver.
Features:
Sensors
- Sensor: Global Shutter OG02B10 Color
- Pixel size: 3 µm x 3 µm
- Active array size: 1600 x 1300
- Optical Format size: 1/2.9″
- Maximum image transfer rate: 1600 x 1300: 60 fps
- Support for image sizes: 1600 x 1300, 1280 x 720, 640 x 480
- Input clock frequency: 6~27 MHz
- Max S/N ratio: 37.4 dB
- Dynamic range: 68 dB
Lens
- Lens Thread: M12 x 0.5P
- Lens Field of View(FoV): 83°(H)
- IR Sensitivity: with IR Filter, sensitive to visible light
Camera Module
- Output interface: 2-lane MIPI
- Output formats: RAW 8/10 bit
- Minimum exposure time: 1 row period (11.3us at the resolution of 1600×1300 on Jetson Nano.)
Driver Features:
- Support Gray, Y10, Y16
- Support standard V4L2 framework, Video Nodes and Controls (Exposure, Gain and depending on camera parameters)
- Support External Trigger Global Shutter Camera
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
- Support Dual Camera Synchronzation
Applications:
- DSC
- Machine Vision
- Robotics
- Face Recognition
Package Including
- 1pcs Arducam 2MP OG02B10 Color Camera Module
- 1pcs Arducam Adapter Board for Jetson Nano
- 1pcs 150mm 15pin 1.0mm FPC cable
- 1pcs 73mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- Acrylic case for the camera module
How to purchase
You can purchase this item from Arducam distributors