They Just Work – We’ve tested this lens, the camera cable and the tripod stand on the 12MP RPi HQ Camera. With them, you can get decent quality image and release your hands.
Fisheye M12 Lens – 180 degree HFOV (horizontal field of view), another cost-effective choice that adds up to your Raspberry Pi High Quality Camera Module, which provides a much wider Field of View than C and CS lenses.
The Tripod Stand – Pocket size and lightweight, 1/4”-20 mounting screw, hassle-free fitting the RPi HQ Camera Board.
The Camera Cable – 60cm/2ft length, 15 Pin 1.0mm Pitch interfaces, black color and long enough, goes well with 3D printers OctoPrint setup and Raspberry Pi High Quality Camera.
In order to meet the new demands of the lens to work with Raspberry Pi High Quality Camera, Arducam selected and tested a wide range of M12-mount lenses from long focus to wide angle for shooting on your Rpi HQ cameras. It’s now much easier for you to get the best lens you’ll need, and we will keep the lens list growing in the near future.
If you want to grab all the available S-mount lenses for the HQ camera, Arducam has also got a 6-in-1M12 lens bundle here.
Model No: M25156H18
Optical Format: 1/2.3”
Focal Length: 1.56mm
Field of View (FOV): 180° (H)
Mount: M12 mount
Back Focal Length: 4.3mm
Other Arducam S-mount lens bundles with different FoVs