Description
Overview
Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Using Arducam Pivariety camera modules, users can get better performance and a wider variety of camera, lens options. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver and camera modules (V1/V2/HQ). Now Arducam made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Lens Shading Correction, etc.
Note: This camera is released for the official NVIDIA® Jetson™ Developer Kit, and it does not guarantee to support other third-party boards.
Applications
- UAV/Drones/FPV camera
- Machine Vision
- Robotics
- IoT
- Face Recognition
- Defect Detection
Specifications
| Sensor Type | Sony 21MP IMX320 |
| Pixel Size | 1.12um x 1.12um |
| Optical Size | 1/2.4” |
| Active Pixels | 5344(H)x4016(V) |
| Sensor Output Format | RAW10 |
| ISP Output Format | JPG, YUV420, RAW, DNG; MJPEG, H.264 |
| Interface Type | 2-lane MIPI CSI-2 |
| Frame Rates | 5344×4012@9 fps, 3840×2160@10 fps, 2592×1944@15 fps, 2656×2004@30 fps, 1920×1080@30 fps, 1280×960@120 fps, 1280×720@120 fps, 640×480@120 fps |
| Focal Length | 4.77mm |
| F.NO | 1.75±5% |
| FOV | 64°(H) |
| Focus Type | Motorized focus, programmable focus control |
| IR Sensitivity | Integral IR filter, visible light only |
| Board Size | 38mm x 38mm |
Note
| Note for Supported Raspberry Pi Boards and OS | |||
|---|---|---|---|
| Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
| Raspberry Pi 5 | √ | ||
| Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | |
| Raspberry Pi CM3 / CM3+ / CM4 / CM5 (extra carrier board required) | √ | √ | |
Package Including
- 1 x Arducam 21MP IMX230 ISP Camera Module
- 1 x 150mm 15-22pin FPC cable
- 1 x 150mm 22-22pin FPC cable
- 1 x acrylic case kit with assembly accessories
Documentation
- Getting started with Arducam IMX230 camera
- Quick Start Guide for Arducam Motorized Focus Camera on NVIDIA Jetson
- Get Start with Arducam Jetvariety Camera on NVIDIA Jetson
- How to build the Raspberry Pi Kernal Driver
Pivariety IMX230 21MP Motorized Focus Camera Module
1. Introduction Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. Using Arducam Pivariety camera modules, users can get better performance and a wider variety of camera, lens options. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver […]
Install and build Raspberry Pi Kernel Driver for Arducam Pivariety Camera
In order to ensure the normal working of the hardware, the driver needs to operate according to standard procedures. These operations are cumbersome. Generally, only the hardware manufacturer understands the specific details. One of the main tasks of the driver is to ensure that the hardware works as expected according to the standard procedure and […]
 3D drawing.step | Acrylic Bracket Assembly Guide.pdf |
Datasheet
- Please contact us for the image sensor datasheet.
