Description
Item Description:
As part of Project Jetvariety, which allows any camera modules to be connected to the high-speed CSI-2 connector on the Jetson Board. Arducam released OV9281 global shutter monochrome (B&W) 1280×800 resolution MIPI camera module for Jetson Board, and it is based on 1/4-inch Omnivision OV9281 image sensor which adopts OmniPixel3-GS™ technology to provide full-frame, sub-sampled, and windowed 8/10-bit MIPI images, and capable of operating at up to 120fps in full resolution at 1-lane MIPI bus with complete user control over image quality.
The sensor’s global shutter and excellent low-light sensitivity allow it to be used for any application that needs gesture detection, head and eye tracking, and depth and motion detection.
Currently, NVIDIA official has released the NVIDIA Jetson Orin series developer board. Based on it, we have also adapted Arducam Jetvariety camera into NVIDIA Jetson Orin NX kernel.
Note: This camera is released for the official NVIDIA® Jetson™ Developer Kit, and it does not guarantee to support other third-party boards.
⚠️ KERNEL CAMERA DRIVER USED
This camera relies on kernel drivers to work – one kernel version, one camera driver. Up or downgrading your OS leads to a kernel bump, and you may need to re-install a matching driver.
Key Specifications:
- Sensor: Monochrome global shutter OV9281
- Pixel Size: 3 μm x 3 μm
- Active array size: 1280 x 800
- Optical Size: 1/4 inch
- Focusing Range: 30mm ~ infinite
- Output interface: 2-lane MIPI serial output
- Output formats: 8/10-bit BW RAW
- Resolution & Frame Rate: 1280×800@80fps, 1280×720@80fps，640×400@240fps
- Resolution&Frame Rate(NVIDIA Orin NX): 1280×800@80fps,1280×720@80fps,640×400@240fps
- Maximum image transfer rate: 1280 x 800@120 fps
- Board Size: 40mm x 40mm
- Lens FoV: 130°(D)/110°(H)/90°(V)
- IR Sensitivity: sensitive to IR, No IR filter
Application:
- Security
- High dynamic range imaging
- Unattended surveillance
- Stereo vision
- Machine vision
- Automation
Driver Features:
- Support Gray, Y10, Y16
- Support standard V4L2 framework, Video Nodes, and Controls (Exposure, Gain and depending on camera parameters)
- Support External Trigger Global Shutter Camera
- Support Single Line Driver Installation Command
- Support OpenCV Friendly and Provides Source Code Demonstration
- Support Dual Camera Synchronization
Documentation
Jetvariety – MIPI Camera Modules for Jetson Nano/Xavier NX
Jetson Nano’s MIPI interface and MIPI connectors The Jetson Nano Developer Kit consists of two parts: The Computer on a Module (CoM), and the carrier board. The CoM supports high-speed MIPI interface, which is now a must-have for embedded vision applications. The carrier board of the Jetson Nano developer kit exposes the MIPI interface in […]
 3D drawing.step | Acrylic Bracket Assembly Guide.pdf |
Package Including
1pcs Arducam OV9281 1MP Mono Global Shutter MIPI Camera
1pcs 15mm 15-22pin FPC cable
1pcs 15mm 22-22pin FPC cable
Acrylic case for the camera module
Blog
Project Jetvariety: How Arducam Makes it Possible to Use Any Camera Module on the Jetson Nano with One Kernel Driver for All
Introducing Project Jetvariety – Increase the Jetson Nano Camera Variety Today we are proud to introduce the Project Jetvariety (short for Jetson variety), which aims to quickly increase the variety of Jetson Nano cameras with our proprietary general-purpose camera solution. The Jetson Nano and Xavier NX only have official driver support of the Raspberry Pi […]
Video
How to purchase
You can purchase this item from Arducam distributors
