![[Discontinued] Arducam OV7670 0.3 Megapixel Camera Module for Arduino Boards](https://www.arducam.com/media/catalog/product/cache/2efa09db93707dc55d4d0c42c50c0492/o/v/ov7670_11.jpg)
Arducam ESP8266 UNO Board and OV2640 Mini Module Camera Shield Compatible with Arduino UNO R3
SKU
B0082+B0067
Note: This product was discontinued.
- ESP8266 board for Arducam mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board
- Build in ESP8266-12E Module
- Interface specially designed for Arducam mini module camera shield with OV2640 2 megapixels lens (SKU:B0067) / OV5642 5 megapixels lens (SKU:B0068), not included
- 11 digital input/output pins, IO ports are 3.3V tolerant
- 1 analog input(3.2V max input)
$39.99
Overview
Specifications
Wiki
Documents
Video
Customization
Overview
Arducam now released a ESP8266 based Arduino board for Arducam mini camera modules while keeping the same form of factors and pinout as the standard Arduino UNO R3 board. The high light this ESP8266 board is that it well mates with Arducam mini 2MP and 5MP camera modules, supports Lithium battery power supply and recharging and with build in SD card slot. It can be an ideal solution for home security and IoT camera applications.
Features of ESP8266 UNO
- Build in ESP8266-12E Module
- 11 digital input/output pins, IO ports are 3.3V tolerant
- 1 analog input(3.2V max input)
- Arducam Mini 2MP/5MP camera interface
- Lithium battery recharging 3.7V/500mA max
- Building in SD/TF card socket
- 7-12V power jack input
- Build in micro USB-Serial interface
- Compatible with Arduino IDE
- Note that the SD/TF card CS pin is shared with UART TX signal, so the UART and the SD/TF can't be used at the same time.
Features of OV2640 Arducam Mini Module Camera Shield
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
- 2 megapixels image sensor OV2640
- M12 mount or CS mount lens holder with changeable lens options
- IR sensitive with proper lens combination
- I2C interface for the sensor configuration，SPI interface for camera commands and data stream
- All IO ports are 5V/3.3V tolerant
- Support JPEG compression mode, single and multiple shoot mode, one time capture multiple read operation, burst read operation, low power mode and etc.
- Well mated with standard Arduino boards
- Provide open source code library for Arduino, STM32, Chipkit, Raspberry Pi, BeagleBone Black
- Small form of factor
Package Including
- 1pcs Arducam ESP8266 UNO Board
- 1pcs OV2640 Arducam Mini Module Camera Shield
Documentation
Example Sketches
In the example folder there are six sub directories for different ArduCAM models and the host application. Directories structure lists as Figure 1 shown. The ESP8266 folder is for ArduCAM-ESP8266-UNO board examples. The Mini folder is for ArduCAM-Mini-2MP and ArduCAM-Mini-5MP modules. The Mini_5MP_Plus folder is for ArduCAM-Mini-5MP-Plus (OV5640/OV5642) modules. The RevC folder is for ArduCAM-Shield-RevC […]
Blog
ArduCAM now Supports ESP8266 Arduino Board with WIFI Websocket Camera Demo
It is good news to hear that the Arduino IDE support was announced on the ESP8266 community forum, the source code can be found from . It is more than another Arduino board, but can be thought as an Arduino combined with a WIFI shield. With faster CPU speed and much smaller form of factor, most important […]
How to purchase
You can purchase this item from Arducam distributors or Amazon store
Customization
About Arducam's Customization Services:
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
What can Arducam customize?
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design