Arducam High Quality IR-CUT Camera for Raspberry Pi, 12.3MP 1/2.3 Inch 477P HQ Camera Module with 6mm CS Lens for Pi 4B, 3B+, 2B, 3A+, Pi Zero and more
SKU
B0270
- Day/Night Vision – Switch IR cut filter on/off automatically
- Shaper Images: This camera adopts 1/2.3″ 12.3 Megapixel sensor for sharp image. Max still resolution 4056(H) x 3040(V)
- Replaceable Lens: Replaceable CS/C lens options. You can click B0241 to get the camera bundle with the metal enclosure
- Native to Raspberry Pi: No need to install additional driver for this camera
was
$84.99
Special Price
$64.99
Overview
Specifications
Wiki
Documents
Video
Customization
Overview
This Arducam module uses the same 12MP image sensor as the Raspberry Pi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there won’t be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. It’s fully compatible with all Raspberry Pi models with a camera connector.
Applications
- DSLR Camera Control
- Remote Viewing Camera
- Time-lapse Machine
- Security System
- Smart Video Doorbell
- Face Recognition
- Instant (Polaroid-Style) Camera, etc.
Specifications
Camera
| Still Resolution | 12.3 Megapixels |
| Video Modes | 2028 × 1080p50, 2028 × 1520p40 and 1332 × 990p120 |
| Sensor Resolution | 4056 x 3040 pixels |
| Sensor image area | 6.287mm x 4.712 mm (7.9mm diagonal) |
| Pixel Size | 1.55 µm x 1.55 µm |
| Optical Size | 1/2.3" |
| IR Sensitivity |
Switch the IR cut filter on/off automatically |
| Supported Platform | Raspberry Pi 5/4B/3B+/3/2/CM3/CM4/CM5/Zero W/Zero 2 W |
Lens
| Focus Type | Manual Focus |
|---|---|
| Focal Length | 6mm |
| F.NO | F1.2 |
| Field of View(FOV) | 65°(H) |
| Lens Mount | CS-Mount |
| MOD | 0.2m |
| Back Focal Length | 7.53mm |
| Lens Dimension | Φ30×31mm |
Electrical & Mechanical
| Camera Board Size | 38 × 38mm |
|---|---|
| Hole Pitch | Compatible with 29mm, 30mm, 34mm |
| Peaking Current | 300mA |
Package Including
- 1 x 12.3MP IR-CUT camera module
- 1 x 6mm focal length CS-mount camera lens
- 1 x 300mm/11.8inch 22pin FPC cable for Pi Zero&W
- 1 x 300mm/11.8inch 15pin to 22pin FPC cable for Pi A&B series
Note
- Raspberry Pi board is not included in the package
- Our camera module support 4-lane in hardware, but the 4-lane camera driver requires extra customization. Here is the reason:
-
Standard Raspberry Pi and Jetson Nano/Xavier NX can’t physically support a 4-lane connection (both of them only have 2-lane CSI connectors). Only the Raspberry Pi Compute Module and some 3rd party Jetson Carrier Boards come with 4-lane hardware support. Therefore, it’s not a general need.
-
Extra works, specifically camera drivers, are required for a 4-lane connection other than the 4-lane physical connector. And the drivers are limited by the performances of the platform itself. For example, 4-lane can’t unlock 4k video on Raspberry Pi because the VideoCore does not currently support it. Jetson Nano is also to some extent limited because of the encoding capabilities. You need to make sure you really need it.
-
Documentation
12MP IMX477 Motorized IR-CUT Camera Module
Introduction This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry Pi High Quality Camera, but offers a mechanical IR cut-off filter switched automatically based on light condition. The official RPi HQ camera is not sensitive to infrared, and there won’t be a NoIR version. On the contrary, this Arducam camera module […]
3D drawing.stp |
3D drawing_Case.stp |
Video
Customization
About Arducam's Customization Services:
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
What can Arducam customize?
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design