Arducam 5MP OV5642 Camera Module /w CS mount Lens

5MP OV5642 /w CS mount Lens.
RAW,RGB,YUV,JPEG output support

SKU: B0019 Category:

Description

Features:

  • Onboard LDO regulators for 2.8V and 1.8V
  • Single 3.3V power input
  • 2.54mm (0.1 inch) standard pin out
  • active array size: 2592 x 1944
  • power supply:
  • core: 1.5VDC + 5% (internal regulator)
  • analog: 2.6 ~ 3.0V
  • I/O: 1.7 ~ 3.0V
  • output formats :
  • (8-bit): YUV(422/420) / YCbCr422,
  • RGB565/555/444, CCIR656,
  • 8-bit compression data,
  • 8/10-bit raw RGB data
  • lens size: 1/4″
  • input clock frequency: 6 ~ 27 MHz
  • shutter: rolling shutter
  • maximum image transfer rate:
  • 5 megapixel (2592×1944): 15 fps (and any size scaling down from 5 megapixel)
  • 1080p (1920×1080): 30 fps
  • 720p (1280×720): 60 fps
  • VGA (640×480): 60 fps
  • QVGA (320×240): 120 fps
  • scan mode: progressive
  • pixel size: 1.4 μm x 1.4 μm
  • image area: 3673.6 μm x 2738.4 μm
  • RAW,RGB,YUV,JPEG output support
  • External 1/4 inch high quality M12x0.5 lens
  • Camera mount Lens is LS-6018

Documentation

5MP OV5642

Introduction Arducam OV5642 camera breakout incorporates Omnivision 1/4−inch CMOS active−pixel digital imaging sensor OV5642 with an active pixel array of 2592×1944. The entire system-on-a-chip (SOC) has onchip AEC/AGC/AWB etc ISP functions, and supports RAW/YUV/RGB/JPEG different Read more…

Camera Breakout Board Introduction

Arducam now offers the camera breakout boards for customers who want to build prototypes, or put the boards into their products. Users don’t need to handle with the tiny and fine pin pitch camera module Read more…

arducam-doc-logo-150-150

Datasheet.pdf

 

Blog

New 5MP OV5642 Camera Module (support JPEG output)

Key specifications active array size: 2592 x 1944 power supply: core: 1.5VDC + 5% (internal regulator) analog: 2.6 ~ 3.0V I/O: 1.7 ~ 3.0V output formats : (8-bit): YUV(422/420) / YCbCr422, RGB565/555/444, CCIR656, 8-bit compression Read more…

2 comments
usb3_camera_shield_blog_thumbnail

Arducam USB3.0 Camera Shield

Introduction Arducam USB3 camera shield is the latest USB3.0 camera shields, it offers the improved performance and enhanced functions than the previous USB2.0 camera shield. It not only supports high resolution and high frame rate Read more…

How to purchase

You can purchase this item from Arducam Distributors

 

Additional information

IR sensitivity

IR sensitive

Lens Mount

C Mount

Interface

DVP

Frame Rates

15fps

Resolution

5MP

Shutter Type

Rolling Shutter

Reviews

There are no reviews yet.

Be the first to review “Arducam 5MP OV5642 Camera Module /w CS mount Lens”

Your email address will not be published. Required fields are marked *

You may also like…