![[Discontinued] Arducam Parallel Camera Adapter Board for USB3 Camera Shield](https://www.arducam.com/media/catalog/product/cache/2efa09db93707dc55d4d0c42c50c0492/b/0/b0126_1.jpg)
Arducam MIPI Adapter Board for USB3 Camera Shield
SKU
B0123
Arducam MIPI Adapter Board for USB3 Camera Shield
$49.99
Overview
Specifications
Wiki
Documents
Video
Customization
Overview
This is MIPI to Parallel adapter board for Arducam USB3 camera shield.
It should work with USB3 camera shield and the following MIPI cameras have been tested.
It should work with USB3 camera shield and the following MIPI cameras have been tested.
- 0.3MP global shutter OV7251
- 0.3MP global shutter SC031GS
- 5MP OV5647
- 8MP IMX219
- 13MP OV13850
Features
- MIPI to Parallel interface convertor
- Support 1-/2-/4-lane MIPI interface
- Raspberry pi standard 15pin CSI interface
Package Including
- 1 pcs MIPI to Parallel Adapter Board for Arducam USB3 camera shield
Documentation
Arducam MIPI Adapter Board for USB3.0 Camera Shield
Introduction Arducam MIPI Adapter Board for USB3 Camera Shield (UC-628 Rev. B) works with Arducam USB3.0 Camera Shield (UC-425 Rev. C) to enable the USB3.0 platform to receive MIPI camera data. For example, you can connect OV9281 camera to MIPI adapter board and USB3.0 camera shield. Then you will get the following product: Arducam MIPI […]
3D drawing.step |
How to purchase
You can purchase this item from Arducam distributors
Customization
About Arducam's Customization Services:
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
What can Arducam customize?
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design