Arducam 1/4″ M12 Mount 1.6mm Focal Length Camera Lens M40160M12

Buy Now

 

  • M12 Mount lens mainly for Arduino and Raspberry Pi cameras, please contact us for other platform.
  • Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is
  • What else is needed: It makes a perfect combo with “Arducam B0031 or B0103”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this lens directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
  • How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera.
SKU: LN018 Categories: ,
SKU: LN018 Categories: ,

Description

Overview

  • Optical Format: 1/4”
  • Effective Focal Length: 1.6mm
  • 35mm equivalent focal length: 18mm
  • FOV on 1/4”sensor(D/H/V): 145°/118°/92°
  • FOV on 1/4”RPi Camera(D/H/V): 118°   F/NO: 2.0
  • Mount: M12
  • Length Holder Height: 7mm
  • Size: 14mm x 10mm
  • Weight: 2g
  • IR Sensitivity: sensitive to visible light, with 650nm IR filter

Lens specification

LN018 1

Mechanical Drawing

LN018 2

 

Package including

  • 1pcs 1/4″ M12 mount  1.6mm Focal Length Camera Lens M40160M12

Note

  • Lens Holder NOT included, you need to order it seperately.
  • Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all.

Lens holder options

SKUHeightHole SpacingMarerial
LH0016mm18mmPlastic
U07567mm20mmMetal
LH002 8.5mm18mmPlastic

 

Blog

M12_Lens_kit_thumbnail

Arducam M12 Mount Lens Kit for Raspberry Pi and Arduino Cameras

Over the past few years, Arducam has launched many camera boards for Raspberry Pi with M12 or CS-mount lens holders. One of the many features that outperformed the official ones was the interchangeable lenses, a Read more…

Video

Documentation

Introduction

A lens is used to converge the light beams to an image plane on the image sensor for an clear and sharp frame. To understand how to quickly sort out the best lens, refer to Read more…

arducam-doc-logo-150-150

Arducam M12 lens kit

arducam-doc-logo-150-150

Arducam low distortion M12 lens kit

 

How to purchase

You can purchase this item from Arducam distributors

 

 

Reviews

There are no reviews yet.

Be the first to review “Arducam 1/4″ M12 Mount 1.6mm Focal Length Camera Lens M40160M12”

Your email address will not be published. Required fields are marked *