Arducam M12 Mount Camera Lens M25170H12

Buy Now

 

  • M12 Mount lens mainly for Arduino and Raspberry Pi cameras, please contact us for other platform.
  • Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is
  • What else is needed: It makes a perfect combo with “Arducam B0031 or B0103”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this lens directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
  • How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera.
SKU: LN007 Categories: ,
SKU: LN007 Categories: ,

Description

Overview

  • Optical Format: 1/2.5”, Effective Focal Length:1.7mm
  • 35mm equivalent focal length: 18.4mm
  • FOV on 1/2.5” sensor(D/H/V): 180°/180°/140°
  • FOV on 1/2.7” sensor(D/H/V): 180°/180°/180°
  • FOV on 1/2.8” sensor(D/H/V): 180°/180°/180°
  • FOV on 1/2.9” sensor(D/H/V): 180°/180°/180°
  • HFOV on 1/4” RPi Camera: 118°, F/NO: 2.0
  • Mount:M12, Length Holder Height: 13mm
  • Size: 20mm x 18.7mm, Weight: 8g
  • IR Sensitivity: sensitive to visible light, with 650nm IR filter

Lens specifications

Mechanical drawing

Package Including

  • 1pcs Arducam M12 Mount Camera Lens M40180H10

Note

  • Lens Holder NOT included, you need to order it seperately.
  • Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all.

Lens holder options:

 

SKUHeightHole SpaceingMaterial
U0756M1414.5mm 20mmMental
U0756M13 13mm 20mmMetal
LH00312mm 18mmPlastic
U0756M10 10mm 20mmMetal
LH0028.5mm 18mmPlastic
U0756 7.0mm 20mmMetal
LH001 6.0mm 18mmPlastic

 

Blog

M12_Lens_kit_thumbnail

Arducam M12 Mount Lens Kit for Raspberry Pi and Arduino Cameras

Posted: December 18, 2018

Over the past few years, Arducam has launched many camera boards for Raspberry Pi with M12 or CS-mount lens holders. One of the many features that outperformed the official ones was the interchangeable lenses, a Read more…

Video

Documentation

Introduction

Posted: March 20, 2019

A lens is used to converge the light beams to an image plane on the image sensor for an clear and sharp frame. To understand how to quickly sort out the best lens, refer to Read more…

arducam-doc-logo-150-150

Arducam M12 lens kit

arducam-doc-logo-150-150

Arducam low distortion M12 lens kit

3D Drawing.STEP

3D Drawing.STEP

How to purchase

You can purchase this item from Arducam distributors

 

 

Additional information

Lens Mount

M12 Mount

IR sensitivity

Visible Light

Related Category Products