Arducam 10MP USB Camera Evaluation Kit – CMOS MT9J001 1/2.3-Inch Monochrome Camera Module with USB2 Camera Shield

Buy Now

Note: The product has been changed and the information will be updated soon.

Description

Item Description:

To help customers evaluate the cameras or build a prototype with your own circuits without dealing with fine pin pitch flex cable or soldering balls, Arducam released the evaluation kit with camera breakout boards and Arducam USB2/USB3 camera shield without writing a single line of code.
The MT9J001 camera module features Aptina’s breakthrough low-noise CMOS imaging technology that achieves near-CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. It incorporates the monochrome version of the MT9J001 sensor on board.
1/2.3″ 10MP (3856 x 2764) CMOS monochrome rolling shutter with global reset release camera module MT9J001 .
World-Class 1.67μm Pixel Sensitivity, Produced on Aptina’s world-class 1.67μm pixel with Aptina A-Pix technology, this high-resolution, highly sensitive compact sensor is perfect for DSC/DVC designs.
Improved Low Light Performance Equivalent level as CCD sensor to support DSC applications.
Preprocessing Features, including resampling for sub-sampled video and 2D defect correction, provide improved image quality.

Feature:

  • 1/2.3″ optical format
  • Monochrome Bayer pattern
  • 10MP 3856 x 2764 MT9J001 sensor
  • 1.67 x 1.67 um Pixel size
  • 0.31V/lux-sec responsivity
  • 65.2dB dynamic range
  • single 3.3V power input
  • Parallel camera interface
  • M12 mount lens

Application:

  • Digital video cameras
  • Digital still cameras
  • Industrial camera
  • Medical camera
  • Microscopy camera

Documentation:

arducam-doc-logo-150-150

Datasheet.pdf

MT9J001/MT9J003 DVP Camera with USB2.0 Camera Shield Rev.E

1.Introduction USB2.0 camera shield Rev.E is that it supports MIPI interface sensors without any MIPI adapter board. It has an onboard 16MByte hardware frame buffer and has overcome the bandwidth and dropping frames issue when Read more…

0 comments

Packing List:

  • 1pcs Arducam CMOS MT9J001 1/2.3-Inch 10MP Monochrome Camera Module 
  • 1 pcs Arducam USB2 Camera Shield
  • 1 pcs USB2 Cable

Reviews

There are no reviews yet.

Be the first to review “Arducam 10MP USB Camera Evaluation Kit – CMOS MT9J001 1/2.3-Inch Monochrome Camera Module with USB2 Camera Shield”

Your email address will not be published. Required fields are marked *