Arducam 5MP OV5647 Autofocus Camera for Monitoring 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi
Buy Now
- Convenience: Native to Raspberry Pi 5/4/3B+/3 and more, and Arducam has solved the problems with the installation and setup on OctoPi
- Motorized Focus: See closer and easier than the fixed focus lens, which is better to monitor the 3D printer nozzle and make you pay close attention to your creation
- Focus Controllable: Using the OctoPrint Control tab, which utilizes custom commands from your slicer to adjust focus while printing
- Long Extension: 100cm/3.28ft extension cable included, especially useful when you don’t want to place the camera near the Raspberry Pi
Overview
Most 3D models take more than a few hours to print, so you may wish to leave the 3D printer at some point in the printing process. Using an Arducam camera to monitor 3D printing can make you pay close attention to your creation. Since most cameras are not made specifically for the use of 3D printing software, it is impossible to obtain proper support from the manufacturer. Fortunately, Arducam can help you solve all installation and setup problems.
For more details, please refer to our Doc page: https://www.arducam.com/docs/cameras-for-raspberry-pi/native-raspberry-pi-cameras/how-to-use-arducam-motorized-focus-camera-with-octopi-to-monitor-3d-printers/
Applications
- IoT cameras
- OctoPrint, Monitoring 3D Printer
- Robot cameras
- Wildlife cameras
- Other battery-powered products
- Can be used in MCU, Raspberry Pi, ARM, DSP, FPGA platforms
- 1×5MP OV5647 camera board with motorized lens for Raspberry Pi
- 1 set acrylic case for the camera module
- 1×5.9″(15cm) flex ribbon cable for Raspberry Pi Model A&B series
- 1×5.9″(15cm) flex ribbon cable for Raspberry Pi Zero
- 1×39.4″(100cm) flex ribbon cable for Raspberry Pi Model A&B series
- 3×Manuals
Note
- Raspberry Pi Board is not included in the package
- The camera’s autofocus function needs to be operated by using python scripts, etc. Please see the following documentation for detail
- Contact [email protected] for customization and [email protected] for support
| Note for Supported Raspberry Pi Boards and OS | |||
|---|---|---|---|
| Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
| Raspberry Pi 5 | √ | ||
| Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | √ |
| Raspberry Pi CM3 / CM3+ / CM4 (extra carrier board required) | √ | √ | √ |
Documentation
 Manual | User guide video |
