OV2640 is known as an evergreen image sensor from OmniVision. It features DVP friendly interface, powerful on-chip ISP with JPEG encoding, and low power consumption, which makes the OV2640 image sensor unique and popular for IoT camera applications at all times.
This CCM (compact camera module) based on an OV2640 sensor, constructed with a high quality stock lens and FPC with 24 pin Goldfinger interface. It's mini but used widely, highly recommended for STM32, ESP32, ESP8266, and other low-end ARM and RISC microcontrollers.
Camera
- Array Size: 1600 x 1200 (UXGA)
- Power Supply
Core: 1.3V DC ± 5%
Analog: 2.5~3.0V DC
I/O: 1.7V to 3.3V
- Power Consumption
YUV mode full res & framerate: 125mW
Compressed mode full Res & framerate: 140mW
Standby:600μA
- Image Sensor Format: Type 1/4″
- Maximum Image Transfer Rate: 1600×1200@15fps, SVGA@30fps, CIF@60fps
- Sensitivity: 0.6V/Lux-sec
- S/N Ratio: 40dB
- Dynamic Range: 50dB
- Pixel Size: 2.2 x 2.2 μm
- Dark Current: 15mV/s at 60°C
- Output Format: YUV/RGB/Raw RGB Data
- Shutter Type: Rolling Shutter
- Color Filter Array: RGB Bayer Array
- ISP Functions: AE, AWB, Sharpness, Noise Reduction, Defect Reduction, Gamma, Color Saturation, Special Effects
Lens
- EFL: 4.22mm
- F.NO: 2.0
- View Angle: 52 degree (diagonal)
- Distortion: <1.0%
- IR Sensitivity: Integral 650nm IR filter, visible light only
- Lens Type: Fixed focus
Module
- Overall Dimension: 21 x 12.5 x 5.85mm
- Interface: 24 pin goldenfinger
- Mating Connector: F32R-1A7H1-11024
1pcs Arducam OV2640 CCM
If off-the-shelf solutions don't meet your needs, Arducam offers end-to-end custom camera design services to help you turn your ideas into real products. From early concept to mass production, we work closely with you to tailor an imaging solution to meet your unique technical requirements and product goals.
Sensor/Lens/circuit/interface;
Optical filter/housing/ISP, and more.
For more information about Arducam's custom design, please refer to: Arducam Custom Design