Arducam HM01B0 QVGA SPI Camera Module for Raspberry Pi Pico

Buy now

Check out our all-in-one TinyML dev board B0330 here.

 

  • Based on Himax HM01B0-MWA
  • 320×320, Monochrome, up to QVGA @ 60FPS max
  • Designed for Always-on Service Applications
  • Configurable 1-bit video data serial interface with video frame and line sync
  • Ultra-low power consumption, standby < 200uW, QQVGA < 1.1mW
  • Motion detection wakeup interrupt output
  • This camera module can also work with third-party RP2040 boards from Adafruit, Sparkfun, etc.
SKU: B0315 Categories: ,
SKU: B0315 Categories: ,

Description

Overview

Arducam HM01B0 is a camera module featuring ultra-low power consumption, up to QVGA resolution, 1-bit video data interface and line sync, all these, along with other specs make it a perfect camera for building machine vision projects and Always on Serivce applications with energy-efficient MCUs. It’s designed specifically for Raspberry Pi Pico and other third party RP2040 dev boards.  It’s also the built-in camera of the Arducam Pico4ML.

Application

  • Machine Vision
  • Robotics
  • IoT
  • Gestures, intelligent ambient light and proximity sensing, tracking and object identification

Features

  • Ultra Low Power Image Sensor designed for Always-on vision devices and applications
  • High sensitivity 3.6μ BrightSenseTM pixel technology
  • 324 x 324 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
  • <1.1mW QQVGA resolution at 30FPS, < 2mW QVGA resolution at 30FPS
  • Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
  • Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
  • Flexible 1-bit, 4-bit and 8-bit video data interface with video frame and line sync
  •  Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
  • On-chip self oscillator
  • I2C 2-wire serial interface for register access
  • CSP and Bare Die sensor package option
  • High CRA for low profile module design

Specifications

  • Active Pixel Array: 320 x 320
  • Pixel Size: 3.6 µm x 3.6 µm
  • Full Image Area: 1152 µm x 1152 µm
  • Diagonal (Optical Format): 1.63 mm (1/11″)
  • Color Filter Array: Monochrome and Bayer
  • Scan Mode: Progressive
  • Shutter Type: Electronic Rolling Shutter
  • Frame Rate: 51 fps @ 320 x 320, 60 fps @ 320 x 240 (QVGA)
  • CRA (maximum): 30º
  • Supply Voltage : Analog 2.8 V, Digital 1.5V (Internal LDO: 1.5V – 2.8V), I/O 1.5 – 2.8V
  • Input Reference Clock: 3 – 50 MHz
  • Serial Interface (I2C): 2-wire, 400 KHz max.
  • Video Data Interface: 1b, 4b, with frame / line SYNC, 8b is not supported.
  • Output Clock Rate MAX: 50 MHz for 1bit, 12.5 MHz for 4bit
  • Est. Power Consumption (include IO with 5pF load): QVGA 60FPS (Typical) <4 mW, QVGA 30FPS (Typical) <2 mW, QQVGA 30FPS (Typical) 670 µW

 

Sensor Schematics

highmax hm01b0 image sensor shcematics

Package Contents

  • 1 x Arducam HM01B0 camera module

Video

Documentation

Arducam HM01B0 QVGA Camera Module for Raspberry Pi Pico

1. Introduction Arducam HM01B0 is a camera module featuring ultra-low power consumption, up to QVGA resolution, 1-bit video data interface and line sync. This, along with other specs makes it a perfect camera for building Read more…

0 comments
arducam-doc-logo-150-150

Datasheet-camera module.pdf

arducam-doc-logo-150-150

Datasheet-sensor.pdf

Github

ArduCAM HM01B0

 

Reviews

There are no reviews yet.

Be the first to review “Arducam HM01B0 QVGA SPI Camera Module for Raspberry Pi Pico”

Your email address will not be published. Required fields are marked *