Camera Accessories , Camera Cables
Arducam for Raspberry Pi Zero Camera Cable Set, 2 Pack 11.8″ (30cm) Ribbon Flex Extension Cables for Pi Zero&W
- You’ll Be Getting: 2 pcs 11.81 inch (30cm) flat camera cable, one end is 15 Pin 1.0mm Pitch interface and the other end is 22 Pin 0.5mm interface.
- Compatibility: Natively compatible with Raspberry Pi zero&w, also can be used with Arducam MIPI camera series for raspberry pi.
- Longer Than Others: Long enough for mounting the camera, especially useful when …
Camera Accessories , Camera Cables
Arducam for Raspberry Pi Zero Camera Cable, 11.8″ (30cm) Ribbon Flex Extension Cable for Pi Zero&W
- You’ll Be Getting: 1 pcs 11.81 inch (30cm) flat camera cable, one end is 15 Pin 1.0mm Pitch interface and the other end is 22 Pin 0.5mm interface.
- Compatibility: Natively compatible with Raspberry Pi zero&w, also can be used with Arducam MIPI camera series for raspberry pi.
- Longer Than Others: Long enough for mounting the camera, especially useful when …
Camera Cables
Arducam for Raspberry Pi Camera Ribbon Flex Extension Cable Set (3Pcs), 2”(5cm) 23.62”(60cm) 39.37”(100cm) for Raspberry Pi, Black
- 3 length: 2inch/5cm, 2ft/60cm, 3.28ft/100cm, both ends are 15 Pin 1.0mm Pitch interfaces.
- Natively compatible with all Raspberry Pi A&B series board, camera module and display.
- Works great for a “stealth” black look, goes well with 3D printers OctoPrint setup and Raspberry Pi High Quality Camera.
- Whatever for 3D printer, home security, or other raspberry pi camera project, this …
Camera Cables
Pi Camera Cable, Arducam Octoprint Octopi Webcam, Monitor 3D Printer, 2FT/60CM Long Extension Flex Ribbon Cable for Raspberry Pi, Black
- Natively compatible with all Raspberry Pi A&B series board, camera module and display.
- 60cm/2ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Rpi camera cable, especially useful when you don’t want to place the camera near the Raspberry Pi.
- Works great for a “stealth” black look, goes well with 3D printers OctoPrint setup and Raspberry Pi High …
Camera Cables
Pi Camera Cable, Arducam Octoprint Octopi Webcam, Monitor 3D Printer, 3.28FT/100CM Long Extension Flex Ribbon Cable for Raspberry Pi, Black
- Natively compatible with all Raspberry Pi A&B series board, camera module and display.
- 100cm/3.28ft length, 15 Pin 1.0mm Pitch interfaces, longer than the standard Rpi camera cable, especially useful when you don’t want to place the camera near the Raspberry Pi.
- Works great for a “stealth” black look, goes well with 3D printers OctoPrint setup and Raspberry Pi High …
Camera Cables , Cameras for RaspberryPi
Arducam CSI to HDMI Cable Extension Module with 15pin 60mm FPC Cable for Raspberry Pi Camera Specific (Pack of 2, 1 Set)
- This Arducam CSI to HDMI Cable Extension Module is to extend the Raspberry Pi camera cable with a standard HDMI cable, it works with the V1 and V2 cameras
- By using high-speed HDMI cable, the camera can run over 10 meters, that high extend the usage of the Raspberry pi cameras
- In addition to extend the camera signal, the …
8MP IMX219 Cameras , Camera Cables
Arducam Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable to Extend IMX219 Sensor for Smaller Enclosure, Narrow Space and Spy Camera Project, Work with V2 Camera on Jetson Nano
- This Sensor extension cable is to extend the IMX219 sensor and fit into the space-constrained environment. It can also be used on the Nvidia Jetson Nano.
- Fresh Design: A fresh Arducam design to extend your camera vision on the Raspberry Pi Camera Module V2 – peel off the sensor from the connector on the camera board and put our …
Camera Cables
Cables used for extending the camera module, so you don’t have to live with the stock 150mm short cables.
Showing all 7 results
