NEW Arducam IMX900 Series Camera Module — Stereo · USB · GMSL Multi-Cam, built for Robotics, 3D Capture & In-Vehicle Vision. Shop the Series

2MP Global Shutter OV2311 Mono Camera Modules Pivariety(NoIR ), compatible with Raspberry Pi ISP and Gstreamer Plugin-Arducam

Buy Now

 

  • Low Power Consumption: Minimize active illumination power and reduce the system power requirements.
  • More Applications: Gaze and eye-tracking capabilities, 3D image, depth sensing, etc.
  • Piavriety Solutions: Arducam Pivariety camera solution
  • Easy to Setup: Connected directly to RPi’s CSI-2 camera interface without additional hardware.

    Description

    Overview

    Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver and camera modules (V1/V2/HQ). Now Arducam made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Auto Gain Control, Lens Shading Correction, etc.

    This B0381 is a new member of Arducam Pivariety series, which adopts a 1/2.9Inch 2MP  Global Shutter sensor OV2311, assembled with a Low distortion lens. Based on OV2311 mono Global Shutter sensor, you can achieve moving capture, factory supervise, 3D image and so on.

    Applications

    • Augmented and virtual reality
    • Drones
    • 3D imaging
    • Machine vision
    • Industrial bar code scanning
    • Industrial automation

    Specifications

    Image SensorMonochrome Global Shutter OV2311
    Pixel Size3 μm x 3 μm
    Active Array Size1600 x 1300
    Optical Size1/2.9 inch
    Frame Rates1600 x 1300@30fps, 1600x 1080@30fps, 1280 x 720@60fps
    Input clock frequency6~27 MHz
    Max S/N ratio37.4 dB
    Dynamic range68dB
    IR SensitiveNo IR filter, sensitive to IR
    FOV on 1/4” RPi Camera83° (H)
    Lens MountM12
    Output interface2-lane MIPI
    Output formatsRAW 8/10 bit
    Minimum exposure time1 row period (11.3us at the resolution of 1600×1300 on Raspberry Pi)

    Package Including

    • 1 x Arducam 2MP OV2311 ISP Camera Module
    • 1 x 150mm 15-22 pin 1.0mm FPC cable
    • 1 x 150mm 22-22 pin 1.0mm FPC cable
    • 1 x acrylic case kit with assembly accessories

    Note

    • Raspberry Pi is not included in the package
    • You need driver for this camera module, please refer to the following documentation to run it
    • Note for Supported Raspberry Pi Boards and OS
      PlatformBookworm(rpicam)Bullseye(libcamera)Buster(raspistill)
      Raspberry Pi 5  
      Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W 
      Raspberry Pi CM3 / CM3+ / CM4 / CM5
      (extra carrier board required)
       

    Documentation

    How to Purchase

    You can purchase this item from Arducam distributors

    Additional information

    Platform

    Raspberry Pi

    Camera Solution

    Pivariety Camera

    Interface

    MIPI CSI

    Sensor

    OV2311

    On-board ISP

    NO

    Shutter Type

    Global Shutter

    Resolution

    2MP

    Chroma

    MONO

    Features

    Global Shutter

    Focus Type

    Manual Focus

    Lens Mount

    M12

    You may also like…