NEW Arducam IMX900 Series Camera Module — Stereo · USB · GMSL Multi-Cam, built for Robotics, 3D Capture & In-Vehicle Vision. Shop the Series

Arducam 1/2.5″ M12 Mount 3.6mm Focal Length Low Distortion Camera Lens M25360H06S

Buy Now

 

  • Low Distortion M12 Mount lens mainly   for Arduino and Raspberry Pi cameras, please contact us for other platform.
  • Why we need it: In case you’re disappointed with the fixed official cameras and want precise control of what gets into the frame of your image – like how wide and how close it is
  • What else is needed: It makes a perfect combo with “Arducam B0031 or B0103”, a more flexible and slightly larger camera module for Raspberry Pi that uses M12 lenses to frame up the best image. You can’t use this lens directly with the official Raspberry Pi Camera Module V2 because an M12 holder or 18/20mm hole spacing of the camera board is required
  • How to use it: Get a camera with an M12 lens holder, and screw one lens slowly into the M12 lens holder until you see a clear and sharp image on a video screen. Screw it out a little if you want to shoot objects close to the camera.
SKU: LN012 Categories: , ,

Description

Overview

  • Arducam Lens M25360H06S featuring low distortion
  • Module number:M25360H06S
  • Optical Format: 1/2.5” Distortion :＜ -0.35%/li>
  • Effective Focal Length: 3.6mm
  • 35mm equivalent focal length: 38.92mm
  • FOV on 1/2.5”sensor(D/H/V):96°/80°/65°
  • FOV on 1/2.7” sensor(D/H/V): 90°/82°/52°
  • FOV on 1/2.8” sensor(D/H/V): 88°/80°/50°
  • FOV on 1/2.9” sensor(D/H/V): 86°/78°/49°
  • FOV on 1/4”RPi Camera: 55°
  • F/NO: 2.8  Mount: M12
  • Size: 14mm x16.3mm   Weight:4g
  • IR Sensitivity: sensitive to visible light, with 650nm IR filter

Lens specifications

Mechanical drawing

 

Package Including:

  • 1pcs Arducam 1/2.5″ M12 Mount 3.6mm Focal Length Low Distortion Camera Lens M25360H06S

Note :

  • Lens Holder NOT included, you need to order it seperately.
  • Typically lenses with a larger Field of View will require shorter holders, and that means you need to change the lens holder if the lens does not focus at all.


Lens holder options

 

SKUHeightHole spacingMaterial
U0756M1616.5mm 20mmMental
U0756M1414.5mm 20mmMental
U0756M13 13mm 20mmMetal
LH00312mm 18mmPlastic
U0756M10 10mm 20mmMetal
LH0028.5mm 18mmPlastic
U07567.0mm  20mmMetal
LH001 6.0mm  18mmPlastic

 

 

Video

 

Documentation

Datasheet.pdf

Datasheet.pdf

3D drawing.stp

3D drawing.stp

How to purchase

You can purchase this item from Arducam distributors




 

Additional information

Lens Mount

M12

IR sensitivity

Visible Light

Related Category Products