Sensor | SONY STARVIS IMX462 |
Optical Size | Type 1/2.8” (Diagonal 6.46 mm) |
Pixel Size | 2.9μm×2.9μm |
Minimum illumination | 0.01Lux |
Shutter Type | Rolling Shutter |
Max Sensor Resolution | 1920 x 1080, 2MP |
Color Filter Array | Bayer RGB |
Resolution and Frame Rate | 5-60fps@1080P |
Supported Platform | Pi 5/4/3/Zero/CM3/CM4 |
Camera Interface | 2-lane MIPI |
Output Format | RAW10 |
ISP Output Format | JPG, YUV420, RAW, DNG; MJPEG, H.264 |
Focus Type | Manual |
Lens Type | M16 Lens |
F.NO | 0.95±5% |
Focal Length | 4mm±5% |
FOV(Field of View) | 92°H |
IR Sensitivity | Integral IR cut filter |
Dimensions | 38mmx38mm |
Hold Pitch | Compatible with 34mm×34mm, 28mm×28mm |
Arducam Ultra Low Light 2MP IMX462 STARVIS Camera, 1080P HD Wide Angle Pivariety Camera Module for Raspberry Pi
- Based on Sony 2MP IMX462 STARVIS color sensor
- Ultra Low Light: Minimum illumination: 0.01Lux
- Wide Aperture: F.N0 0.95(Allow more light enter)
- ISP Support: Auto exposure, auto white balance
- Wide Compatibility: Compatible with all libcamera-based apps maintained by the RPi foundation, like Gstreamer, OpenCV
- More Applications: Night vision, home security, machine vision and so on
Overview
Arducam Pivariety is a Raspberry Pi camera solution to take the advantage of using its hardware ISP functions. For a long time, Raspberry Pi users are limited to use the closed-source official supported camera driver and camera modules (V1/V2/HQ). Now Arducam made it possible to provide well-tuned ISP for Pivariety camera modules with Auto Exposure, Auto White Balance, Lens Shading Correction, etc.
This B0333 is a new member of the Arducam Pivariety series, which adopts an IMX462 low light sensor and also supports hardware ISP functions like AEC/AGC, etc. That is to say, with this Pivariety, you can get much more decent image quality compared with the Official cameras under low light conditions.
Applications
- Surveillance cameras
- FA cameras
- Industrial cameras
- Autonomous mobile robots, UGV/UAV, ADAS, etc.
Specifications
- 1 x Arducam 2MP IMX462 ISP Camera Module
- 1 x 150mm 15pin 1.0mm to 22pin 0.5mm pitch FPC cable
- 1 x 150mm 22pin 0.5mm to 22pin 0.5mm pitch FPC cable
- 1 x acrylic case kit with assembly accessories
Note
- Raspberry Pi board is not included in the package
- Pivariety Driver can only work with libcamera instead of raspistill/raspivid application
- Due to the limitation of the platform and driver, the output format of the camera is changed from the highest RAW12 output to RAW10.
Note for Supported Raspberry Pi Boards and OS | |||
---|---|---|---|
Platform | Bookworm(rpicam) | Bullseye(libcamera) | Buster(raspistill) |
Raspberry Pi 5 | √ | ||
Raspberry Pi 4B / 3B+ / 3A+ / Zero / Zero 2 W | √ | √ | |
Raspberry Pi CM3 / CM3+ / CM4 (extra carrier board required) | √ | √ |
Documentation
Dimension
Video
Additional information
The spectral transmission properties for the Bayer filter on the IMX462 sensor