Camera Breakout Board , Camera Breakout Boards (OnSemi)
Arducam 10MP MT9J001 Monochrome CMOS 1/2.3″ Camera Module
Buy NowMore:
USB 3.0 quick development and evaluation board for sensors like MT9J001.
NOTE: This camera module can be used together with Arducam USB shield for Windows, Linux and Raspberry Pi.
Please check the following link: http://www.uctronics.com/arducam-usb-camera-shield.html
Camera Breakout Board , Camera Breakout Boards (OnSemi)
Arducam 18MP AR1820HS Color 1/2.3‘’ CMOS Color Rolling Shutter Camera Module for Raspberry Pi
Buy NowCheck Jetson Nano version SKU: B0216
More:
USB 3.0 quick development and evaluation board for sensors like AR1820HS.
Camera Breakout Board , Camera Breakout Boards (OnSemi)
Arducam 1.2MP AR0135 Mono 1/3″ CMOS Camera Module
Buy NowAR0135 Mono.
Global shutter.
High frame rate, high dynamic range, good sensitivity for machine vision with external trigger
Camera Breakout Board , Camera Breakout Boards (OnSemi)
Arducam 0.36MP MT9V034 Color 1/3″ CMOS Camera Module
Buy NowNote: This product was discontinued.
USB 3.0 quick development and evaluation board for sensors like MT9V034.
Camera Breakout Board , Camera Breakout Boards (OnSemi)
Arducam 1.2MP AR0134 Color 1/3″CMOS Camera Module
Buy NowGlobal shutter.
High frame rate, high dynamic range, good sensitivity for machine vision.
Camera Breakout Board , Camera Breakout Boards (OmniVision)
Arducam 2MP OV2640 Color 1/4” Camera Module with LS-4011 M12 Mount lens
Buy Now2MP OV2640 1/4” CMOS.
High sensitivity for low-light operation.
Automatic image control functions.
Camera Breakout Board , Camera Breakout Boards (OmniVision)
Arducam 2MP OV2640 1/4″ CMOS Sensor Camera Module Adapter Board JPEG Out
Buy Now- High sensitivity for low-light operation.
- Maxim resolution 1600 x 1200 UXGA at 15 fps
- Output support for Raw RGB, RGB (RGB565/555),GRB422,YUV (422/420) and YCbCr (4:2:2) formats
- Easy intergrate with STM32,FPGA,DSP,Arduino etc.
- Supports image sizes:UXGA,SXGA, …
Camera Breakout Board
The camera breakout board is provided for fast evaluation for the cameras or building prototype with your own circuits without dealing with fine pin pitch flex cable or soldering balls. The camera breakout boards can easily work with Arducam USB2/USB3 camera shield without writing a single line of code.
Showing 16–28 of 28 results
