Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • [email protected]
    Participant

    Thanks for your response bin, Here are the pictures. I tried these cameras as just a test. The original module I want to use is either https://www.arducam.com/product/mt9f001-mt9f002-14mp-color-1-2-3-inch-camera-module/ or https://www.arducam.com/product/arducam-ar1820hs-1-2-3%e2%88%92inch-18mp-color-camera-module/. I tried soldering as mentioned in the doc but I think I already damaged the board. Is there any on the shelf solution which could prevent me from being exposed to soldering ? Thanks

    [email protected]
    Participant

    Hi Bin,

    Thanks for your response. Somehow whenever I post an image or link on the post it automatically gets removed. Maybe spam filter is filtering out my messages.

    [email protected]
    Participant

    Hi Bin,

    Thanks for your response.Somehow whenever I post my answer with an image my post gets deleted or is not visible. Here is the link for the image. Right now I am using the module UC-599 module for testing purposes but intend to use Either 14 or 16 MP version of breakout board available. Something like this https://www.arducam.com/product/arducam-ar1820hs-1-2-3%e2%88%92inch-18mp-color-camera-module/. Is there any solution available that doesnt require soldering. I tried to follow the guidelines mentioned on your page and maybe damaged the board already.

    Image Link : https://drive.google.com/open?id=1qQ2ELMXlj7cinnWxqVGulEsXzb6UeJbV

    [email protected]
    Participant

    ImageSomehow I am unable to post a reply with an image

    in reply to: Camera hat work with 16 Mp camera #22717
    [email protected]
    Participant

    Hi, I am having the same issue when trying to use it with two UC 599 Boards.

    in reply to: Camera hat work with 16 Mp camera #22718
    [email protected]
    Participant

    Hi I am having the same issue when trying to use two UC-599 camera module with sync hat.

    Here is my output . Kindly suggest any fix. I am using the latest version of library.

    [email protected]
    Participant

    Thanks. It worked 🙂

    [email protected]
    Participant

    Hi, Thanks for your response. The smaller resolution works. But I was trying to get the max resolution.

    Here is the error message

     

    Open camera…
    Found sensor imx135 at address 10
    mode: 0, width: 1280, height: 720, pixelformat: pRAA, desc: (null)
    mode: 1, width: 1920, height: 1080, pixelformat: pRAA, desc: (null)
    mode: 2, width: 2592, height: 1944, pixelformat: pRAA, desc: (null)
    mode: 3, width: 3264, height: 2464, pixelformat: pRAA, desc: (null)
    mode: 4, width: 4192, height: 3120, pixelformat: pRAA, desc: (null)
    mode: 5, width: 8416, height: 3120, pixelformat: pRAA, desc: Used for Arducam synchronized stereo camera HAT, 4208×3120 * 2
    index: 0, CID: 0x00980914, desc: V4L2_CID_HFLIP, min: 0, max: 1, default: 0, current: 0
    index: 1, CID: 0x00980915, desc: V4L2_CID_VFLIP, min: 0, max: 1, default: 0, current: 0
    index: 2, CID: 0x00980911, desc: V4L2_CID_EXPOSURE, min: 0, max: 65535, default: 1606, current: 629
    index: 3, CID: 0x00980913, desc: V4L2_CID_GAIN, min: 0, max: 4095, default: 1024, current: 1024
    index: 4, CID: 0x0098090E, desc: V4L2_CID_RED_BALANCE, min: 0, max: 4095, default: 1664, current: 200
    index: 5, CID: 0x0098090F, desc: V4L2_CID_BLUE_BALANCE, min: 0, max: 4095, default: 1664, current: 99
    index: 6, CID: 0x009A090A, desc: V4L2_CID_FOCUS_ABSOLUTE, min: 0, max: 1000, default: 270, current: 45
    Please choose sensor mode: 4
    Setting the mode…
    choose the mode 4
    Current mode is 4
    Notice:You can use the list_format sample program to see the resolution and control supported by the camera.
    Capture image mode4.jpg…
    Enable Software Auto Exposure…
    Enable Software Auto White Balance…
    Waiting for automatic adjustment to complete…
    mmal: Enable JPEG encoder.

    usrvcsm: [vcsm_malloc_cache]: [9540] [mmal_vc_port buffer]: ioctl mem-alloc FAILED [-1] (hdl: 0)
    usrvcsm: [vcsm_vc_hdl_from_hdl]: [9540]: invalid device or handle!
    usrvcsm: [vcsm_lock]: [9540]: invalid device or invalid handle!
    mmal: mmal_vc_shm_alloc: could not allocate 39238144 bytes of shared memory (handle 0) – mem (nil), vc_hdl 00000000
    mmal: mmal_vc_port_payload_alloc: vc.ril.image_encode:out:0(JPEG): failed to allocate 39238144 bytes of shared memory
    mmal: mmal_pool_initialise_buffer_headers: failed to allocate payload 0/1
    mmal: Failed to create isp output pool.
    Segmentation fault

Viewing 8 posts - 1 through 8 (of 8 total)