bin
Forum Replies Created
- AuthorPosts
bin
KeymasterDear Customer,
Sorry for my late reply. Don’t worry and I will try my best to help you.
It is not merely a “stretched” image from Mode0. For the mode1 (8112×3040), you should use two 12MP camera, and it is full spell configuration.
Feel free to let me know if you need more help.
March 29, 2021 at 6:07 pm in reply to: HQ cam + 16 mm lens + Arducam UVC adaptor gives black picture #35640bin
KeymasterDear Customer,
Sorry for my late reply. I have not received your images now. Would you like to resend it to me again?
Feel free to let me know if you need more help.
bin
KeymasterDear Sir,
Don’t worry. We have found that some versions of the kernel cannot run arducam 9281. We have reported to PI that the latest kernel version should be supported. Please download the latest firmare image file to test.
Feel free to let me know if you need more help.
bin
KeymasterDear sir,
Thanks for your business.Don’t worry and I will try my best to help you.
It seems the hardware setup is abnormal. Have you tested your camera using our MIPI_Camera library?
bin
KeymasterPlease contact our [email protected] for details.
bin
KeymasterHi,
Thanks for your contacting us.
Don’t worry and I will try my best to help you.
It seems that your camera’s hardware connection is abnormal. Please check the hardware connection in detail. What’s more, do you have extra cable line?
March 16, 2021 at 4:15 am in reply to: ArduCam OV5642 raw image returns a byte array almost entirely filled with 0x04 #35294bin
KeymasterHi,
Thanks for your contacting us.
I advise you test videostreaming demo firstly to check if the camera is nomal.
March 16, 2021 at 4:03 am in reply to: Extending distance between IMX477 and Jetson Nano to 30ft #35293bin
KeymasterHello,
Thanks for your business. Don’t worry and I will try my best to help you.
The data bus of imx477 is a high-speed bus, we do not recommend using too long data lines, which will have a certain influence on the signal.
bin
KeymasterHi,
Sorry for my late reply due to our forum system’s issue. Have you solved your issue?
Feel free to let me know if you need more help.
bin
KeymasterHi,
Sometimes, you need to manually adjust the focal length of the lens, because the stroke of the motor is fixed and there is a certain focus range
bin
KeymasterHi, Our ISP is still developing. Please waiting .
March 6, 2021 at 12:21 am in reply to: Segmentation error / Valuerror when using camera.capture #35203bin
KeymasterSorry to reply to you so late, there is a problem with our forum service system, it has been fixed now, has your problem been solved? Please feel free to let me know if you need more help.
We have updated our lib and you can download our latest lib to test.
March 6, 2021 at 12:10 am in reply to: open fail, rtn_val = 65281 using IMX 291 on raspberry Pi #35202bin
KeymasterSorry to reply to you so late, there is a problem with our forum service system, it has been fixed now, has your problem been solved? Please feel free to let me know if you need more help.
bin
KeymasterSorry to reply to you so late, there is a problem with our forum service system, it has been fixed now, has your problem been solved? Please feel free to let me know if you need more help.
bin
KeymasterHi,
Sorry for my late reply. Have you solved your issue now?
- AuthorPosts