v4l-ctl settings for low light IMX291

Published by dbrb2 on

New Home Forums USB Video Class (UVC) Camera Modules v4l-ctl settings for low light IMX291

Viewing 7 reply threads
  • Author
    Posts
    • #71979
      dbrb2
      Participant

      Evening,

      I’ve been working with the 1080p UVC Arducam USB module that uses the IMX291 sensor (UB020201)

      I’m trying to optimise its use at night, and have been trying various different v4l settings when connected to a pi running raspbian. The defaults are:

      brightness 0x00980900 (int) : min=-64 max=64 step=1 default=0 value=0
      contrast 0x00980901 (int) : min=0 max=64 step=1 default=32 value=32
      saturation 0x00980902 (int) : min=0 max=128 step=1 default=64 value=64
      hue 0x00980903 (int) : min=-40 max=40 step=1 default=0 value=0
      white_balance_temperature_auto 0x0098090c (bool) : default=1 value=1
      gamma 0x00980910 (int) : min=72 max=500 step=1 default=100 value=100
      gain 0x00980913 (int) : min=0 max=100 step=1 default=0 value=0
      power_line_frequency 0x00980918 (menu) : min=0 max=2 default=1 value=1
      white_balance_temperature 0x0098091a (int) : min=2800 max=6500 step=1 default=4600 value=4600 flags=inactive
      sharpness 0x0098091b (int) : min=0 max=6 step=1 default=3 value=3
      backlight_compensation 0x0098091c (int) : min=0 max=2 step=1 default=1 value=1
      exposure_auto 0x009a0901 (menu) : min=0 max=3 default=3 value=3
      exposure_absolute 0x009a0902 (int) : min=1 max=5000 step=1 default=156 value=4154 flags=inactive
      exposure_auto_priority 0x009a0903 (bool) : default=0 value=0
      I recognise that low light performance is likely to be a trade-off of features – I was wondering if anyone here had experience of these trades and could suggest some starting points above.

       

      I was looking at enabling exposure_auto_priority:

      v4l2-ctl –set-ctrl=exposure_auto_priority=1

      which as I understood it should drop frame rate to increase sensitivity – but I wasn’t able to see if it made a difference!
      7.What attempts at troubleshooting have you already made?

      8.How would you like us to help you?

      • This topic was modified 1 month, 2 weeks ago by dbrb2.
      • This topic was modified 1 month, 2 weeks ago by dbrb2.
    • #71984
      bin
      Keymaster

      Hi,

      The exposure_auto_priority control seems to control auto and mannual exposure mode.

      If you want to change the framerate, you can try to reduce the exposure time. (exposure_absolute )

       

    • #72028
      Arducam jyh
      Moderator

      Hi,

      Please ignore the previous reply.

      The exposure_auto_priority is useless.

      If you want to manually control the exposure time, you can turn off the auto exposure mode first by set exposure_auto=1, and then adjust the exposure time by adjusting the value of exposure_absolute.

    • #72088
      dbrb2
      Participant

      Ah – that’s a pity – my understanding (hope) had been that exposure_auto_priority would allow the camera firmware to drop frame rate / increase exposure as light level dropped.

      However, as it stands the camera does not have particularly good low light performance….I can improve it by manually changing the frame rate and exposure, but then have to manually change it back again when it gets brighter!

      Are there any solutions to this, or alternative similar units in the range that might have better success?

    • #72129
      Arducam jyh
      Moderator

      Hi,

      At present, our UVC cameras have a fixed frame rate, which means that the exposure will not be increased by dropping frames in the dark.

      Your suggestion is good, but most people’s needs are fixed frame rates, so we can only follow the needs of most people.
      In the future, we may explore the possibility of adding an optional switch between dropped frames and non-dropped frames. But for now, the camera you buy can only fix the frame rate or manual exposure to drop frames.

       

    • #72197
      dbrb2
      Participant

      Thanks!

      By default there is some auto-exposure control, as can be seen when there is a rapid change in scene brifghtness. If the frame rate stays constant is this acheived by automatically varying the gain?

      Under manual control, altering the exposure will have the side effect of dropping the frame rate?

      I could I suppose script this to change at certain times of day (daytime / nighttime)

      Doing this automatically for a low-light camera would be really helpful, though I understand you have to be led by what customers want.

       

       

    • #72198
      Arducam jyh
      Moderator

      Hi,

      When the frame rate is fixed, the exposure and gain will be adjusted automatically, but the upper limit of the exposure is fixed.
      When manually controlling the exposure, the frame rate will be reduced when the exposure is longer. If the exposure is set to a lower level, it will not affect the frame rate.
      We will take into account the needs you mentioned in the later research and development, but for now, it can only be in your hands. Sorry for affecting your use.

    • #74924
      [email protected]
      Participant

      How are you changing the framerate? I can only get 30FPS with gstreamer, nothing lower.

Viewing 7 reply threads
  • You must be logged in to reply to this topic.