Multicamera Adapter 4 channel V2.1 stopped detecting

Published by Simon on

Home Forums Cameras Modules for Raspberry Pi Multi-Camera and Sync Stereo Camera HAT Multicamera Adapter 4 channel V2.1 stopped detecting

Viewing 3 reply threads
  • Author
    Posts
    • #23418
      Simon
      Participant

      I have a 4 channel V2.1 multi camera adapter hat that was working fine with the Raspberry Pi 4B one day and the next it wasn’t detected as video0 in the /dev list. I have plugged an individual camera in to the pi and it works fine. I have changed the ribbon cable three times with no change either. The power light on the adapter turns on. Is there any reson why it could have just stopped working?

       

    • #23450
      bin
      Keymaster

      Hi,

      Don’t worry and I will try my best to help you.

      Most likely it is a hardware wiring problem, there are many interfaces, and it is easy to go wrong.

      Have you debug it using our test script?

      https://github.com/ArduCAM/RaspberryPi/blob/master/Multi_Camera_Adapter/Multi_Adapter_Board_4Channel/Multi_Camera_Adapter_V2.1/init_camera.sh

       

    • #23473
      Simon
      Participant

      Hi I tried to run both the C++ and python init_camera.sh. It says it can’t detect video0. It was working and without changing anything it stopped overnight?

      Hardware SetupTerminal after running init_camera

    • #23524
      bin
      Keymaster

      Hello,

      From the terminal message, it does not detected the 0x10 address which is the sensor’s i2c address. It most likely that the ribbon cable does not connect normally,Please reconnect the ribbon cable and restart your system and retry.

       

Viewing 3 reply threads
  • You must be logged in to reply to this topic.