Jetson Nano don’t recognize ArduCam B0191
Published by trojek on
New Home › Forums › 2. NVIDIA Jetson Cameras › 8MP IMX219 on Jetson Nano › Jetson Nano don’t recognize ArduCam B0191
- This topic has 6 replies, 2 voices, and was last updated 8 months, 1 week ago by
wong.
Viewing 6 reply threads
- AuthorPosts
- March 9, 2020 at 7:01 am #21254
trojek
ParticipantI have a fresh system installed (version 32.3.1) on Jetson Nano and B0191 camera connected to it. I try to display video but the system don’t see the camera. There is no /dev/videoX. I try to debug it with dmesg and the system see that there is camera connected but there is problem with connection on i2c. How can I debug this issue?
- March 9, 2020 at 5:46 pm #21255
- March 11, 2020 at 3:21 am #21261
- March 11, 2020 at 5:49 pm #21270
- March 11, 2020 at 5:55 pm #21265
- March 11, 2020 at 5:55 pm #21260
trojek
ParticipantI attached images of wrings.
Here is part of dmesg with error:
[ 1.239928] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
[ 1.247500] imx219 6-0010: board setup failed
[ 1.251984] imx219: probe of 6-0010 failed with error -121 - May 11, 2020 at 1:32 am #22459
- AuthorPosts
Viewing 6 reply threads
- You must be logged in to reply to this topic.