Capture single images with MT9J003/UC-425 on Raspberry Pi

1.Which seller did you purchase the product(s) from?
UCTRONICS
2.The Model number of the product(s) you have purchased?
MT9J003/UC-425
3.Which Platform are you using the product(s) on?
Raspberry Pi
4.Which instruction are you following?
Online & readme
5.Has your product ever worked properly?
Streaming works, need single images
6.What problems are you experiencing?
Hello,

I have successfully run the streaming demo code, but when I try to run ArduCam_Ext_Trigger_Demo I see the following error:

"

device num:1

index: 0 Serial:AU3S-2042-008

Found 1 devices.

Serial: AU3S-2042-0008

Usb board firmware version not support single mode

"

 

I found this post that looks like someone else was able to take single mode with a similar issue but I do not understand how this worked.

 

How can I take single images with this camera? Can you provide a config file for this?

 

Thank you,

cb
7.What attempts at troubleshooting have you already made?

8.How would you like us to help you?
Code to take single images with MT9J003/UC-425

Hi @cb

UC-425 does not support single shot mode, if you want to take an image, you can use continuous mode and take a frame from it.