Arducam Multi-Camera Adapter on the Nvidia Jetson Xavier NX

Raspberry Pi Cameras sync-stereo-camera-hat
1

I am following this documentation https://www.arducam.com/docs/camera-for-jetson-nano/multiple-cameras-on-the-jetson-nano/arducam-multi-camera-adapter-on-the-nano/ to connect 4 RPI camera on the Nvidia Jetson Xavier NX , with the Arducam Multi-Camera Adapter v2.2 . Here is how I wired it https://imgur.com/WshtR7n , i2cdetect is not showing anything https://imgur.com/a/5HK0Rl9 and the Multi-Camera-Adapter-Demo.py is failing with Error: Write failed . I tried all different position on the GPIO , nothing work . What did I forget ?

Thanks !

2

Hello,

Our engineer has something to ask for leave, We are sorry that we might reply to you next week.

 

3

Has this been resolved? I’m looking at trying a similar setup, a Jetson NX dev board with the synchronized stereo HAT. I love the nano but am going to need more power for the next project.

4

Hello,

i am planing to buy camera module for our Jetson NX based product, is this issue resolved?

Thanks,
Bhimesh

5

Hi @nm ,

Sorry for the late reply, the new version of the stereo hat can support Jetson Xavier NX, please refer to: https://www.arducam.com/docs/camera-for-jetson-nano/multiple-cameras-on-the-jetson-nano/camarray-arducam-1mp2-stereo-camera-mip/

6

For Jetson Xavier NX it should be i2c 8 instead of i2c1