I connect my MT9F002 to win10 PC with a USB3.0 port, and run the GUI (x64) as the interface, but the frame rate is just 5 fps as default, is there any way to change? I saw on the product webpage it can be as high as 30fps even 60fps in some circumstances, should I reset the value of some specific RegAddr?
For the maximum resolution, the frame rate cannot be very high due to bandwidth issues, but a small resolution can have a higher frame rate. If you want a small resolution, we can make some modifications for you.
Also, will decreasing bit depth can further help improve the frame rate and resolution? For example, if I only need 8 bit instead of 24 bit, can you achieve 30 fps at a relatively high resolution?
Unfortunately, we did not successfully configure the resolution you want. We tried a 640x480 resolution but the image quality is very poor. I think this sensor itself has some limitations.
Another question is, is it possible to stabilize the frame rate to 20fps with the config file you provided, I fount the rate is going down when I use a longer exposure time.
There is a certain relationship between frame rate and exposure.When the exposure time you want is too long, the camera may reduce the frame rate to meet the exposure requirements.