Reply To: Motorized IR-cut-filter on IMX219

Home Forums Cameras Modules for Raspberry Pi 8MP IMX219 V2 Cameras Motorized IR-cut-filter on IMX219 Reply To: Motorized IR-cut-filter on IMX219

#12014 Reply

Lee Jackson
Keymaster

Sascha

Sometimes the IR mechanism was stucked when you screw the lens too deep into the lens holder. You have to manually reset the IR cut glass back and forth to make it smooth, and use tweezers to short the IR and GND pins, you can see the IR mechanisim move and making swithcing noise. After that you can put the lens together and try on Pi 4 board.