1. Home
  2. Docs
  3. Arducam USB Camera Shields
  4. USB3.0 Camera Shield Plus

USB3.0 Camera Shield Plus

Introduction

Arducam series USB camera shield is a general purpose USB camera control board for PC and embedded signal board computer. It hides the complex nature of the camera and provides the plug and play camera control interface as well as the ready to use SDK library and demo software source code. The Arducam supports variety camera modules from 0.3MP to 21MP or even higher.

Arducam USB3.0 Camera Shield Plus is the latest USB3.0 camera shields, it offers the improved performance and enhanced functions than the previous USB3.0 camera shield. It directly supports MIPI camera, supports RAW hardware decoding, and improves USB3.0 transmission bandwidth.It not only supports high resolution and high frame rate image sensors, but also supports stereoscopy camera and IRCUT control feature. With the given camera configuration files, user can switch between different cameras without any effort. It is the ideal solution for camera evaluation/testing, robot/drone, IoT, machine vision and scientific applications.

Features

  • Support single-lane DVP camera input
    • Support 8/10/12 bit pixel color depth
    • Support RAW/YUV/RGB/JPG and other formats
    • Support VSYN, PCLK level adjustment
  • Support dual-lane MIPI camera input
    • Support 1/2/4 Lane
    • Support RAW/YUV/RGB/JPG and other formats
    • Support RAW10/RAW12 hardware analysis
    • The maximum resolution supports 21MP
    • Support single-lane display (default A-lane) and dual-lane synthesis (full synchronization)
  • The maximum output bandwidth of USB3.0 is 360MB
  • Built-in IRCUT control (optional)
  • Support Windows/RaspberryPi/Jetson and other platforms, provide free binary SDK library and demo software source code
  • Can be customized

Application

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Machine vision 
  • Scientific cameras

Articles

Was this article helpful to you? Yes No