1. Home
  2. Docs
  3. SPI cameras for Arduino
  4. Software
  5. Host Debug Tools

Host Debug Tools

  • To make it easier for user to debug the camera, Arducam release the Host_V2 application. User can get it from https://github.com/ArduCAM/Arduino/tree/master/ArduCAM/examples/host_app
  • Specific Parameter:
  • IP: 
  • The host v2 supports wifi connection, it can act as a TCP client, input the right IP address. Notice , the wifi connect port is 80.
  • Port: The host v2 supports serial port connection. it used to choose the right serial port
  • Baudrate: It used to choose the right baud rate
  • Pix: It used to choose the right sensor and resolution. The host v2 supports OV2640/OV5640/OV5642. Different sensor has different resolution.
  • Function: It used to set the special function of each sensor. For example, user can set the light to automatic mode or sunny mode.
  • Mode: It used to set the single capture mode and streaming mode.
  • File: It used to set the local path where the image will be stored into.
  • Capture: It used to start capture and streaming
Arducam_Host_V2
Host_V2 running demo

Was this article helpful to you? Yes No