To support multiple cameras working simultaneously, Arducam release Arducam 4 Cameras Adapter Board.
- Hardware Setup
- Plug the Multi-Camera Adapter Board to the Arduino
- Plug four cameras to the Multi-Camera Adapter Board, Shown as the below figures:
Hardware Setup 1
Hardware Setup 2Arduino UNO | | | Arducam 4 Cameras Adapter Board |
SCL | | | SCL |
SDA | | | SDA |
VCC | | | VCC |
GND | | | GND |
SCK | | | SCK |
MISO | | | MISO |
MOSI | | | MOSI |
D4 | | | Camera_1 |
D5 | | | Camera_2 |
D6 | | | Camera_3 |
D7 | | | Camera_4 |
- You can get our open source code here
- You should need our Arducam Host V2 which can be got here
Arducam_4cam_videostreaming
Arducam 4cameras running demo Was this article helpful to you?
Yes 3 No