1. Home
  2. Docs
  3. Raspberry Pi Pico
  4. Arducam HM0360 VGA SPI Camera Module for Raspberry Pi Pico

Arducam HM0360 VGA SPI Camera Module for Raspberry Pi Pico

Introduction

Arducam HM0360 VGA SPI Camera Module for Raspberry Pi Pico

Arducam HM0360 is a low cost camera module built specifically for Raspberry Pi Pico and all available RP2040 dev boards.

  • Based on Himax HM0360-MWA.
  • 640×480, Monochrome, up to VGA @ 60FPS max.
  • Designed for Always on Serivce Applications.
  • Configurable 1-bit video data serial interface with video frame and line sync.
  • Ultra-low power consumption, standby < 140uW, VGA < 19.6mW.
  • Motion detection wakeup interrupt output.

Specs

  • Ultra Low Power, high sensitivity, low noise VGA sensor.
  • Operates 7.8mA VGA 60 FPS down to 240µA in monitor mode.
  • Automatic wake and sleep operation with programmable event interrupt to wake host processor.
  • On chip high precision oscillator, auto exposure / gain, ambient light sensor and zone detection.
  • Metered exposure provides well exposed first frame and after extended sleep (blanking) period.
  • External frame synch and stereo camera support.
  • Flexible binning, subsampling and region of interest.
  • Embedded line provides metadata frame, AE statistics, zone trigger and other interrupt event information.
  • On-chip high precision oscillator and LDO.
  • 1-lane MIPI CSI2 and 8-bit parallel/serial data format that supports 1-bit, 4-bit and 8-bit protocol.
  • I2C 2-wrie serial interface supporting burst operation for fast register access.
  • < 13 mm2 CSP sensor package option.
  • High CRA for low profile module design.

Package including

1 x Arducam HM0360 camera module

Was this article helpful to you? Yes No