Software setting
Power on Jetson Nano and open the Terminal (Ctrl+ALT+T)
Test camera with the command:
DISPLAY=:0.0 gst-launch-1.0 nvarguscamerasrc ! 'video/x-raw(memory:NVMM), width=3280, height=2464, format=(string)NV12, framerate=(fraction)20/1' ! nvoverlaysink -e
If you find that the image captured is red. You can try to download .isp file and installed:
IMX219:
wget https://www.arducam.com/downloads/Jetson/Camera_overrides.tar.gz tar zxvf Camera_overrides.tar.gz sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/ sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp
IMX477:
wget https://raw.githubusercontent.com/RidgeRun/NVIDIA-Jetson-IMX477-RPIV3/master/li-camera-calibration-files/camera_overrides.isp sudo cp camera_overrides.isp /var/nvidia/nvcam/settings/ sudo chmod 664 /var/nvidia/nvcam/settings/camera_overrides.isp sudo chown root:root /var/nvidia/nvcam/settings/camera_overrides.isp sudo rm /var/nvidia/nvcam/settings/camera_overrides.isp
