1. Home
  2. Docs
  3. Camera breakout board
  4. 9MP MT9N001

9MP MT9N001

Introduction

Arducam MT9N001 camera breakout incorporates Aptina 1/2.3−inch CMOS active−pixel digital imaging sensorMT9N001 with an active pixel array of 3488H x 2616V including border pixels.

Please note that it is the RAW sensor which doesn’t include ISP (Image Signal Processing) on the image sensor chip, so it only supports manual exposure, manual white balance, manual gain settings.

Key Specification

Optical format 1/2.3−inch (4:3)
Active pixels and imager size 3488H x 2616V
Pixel size 1.75 x 1.75µm
Color filter array RGB Bayer pattern
ADC resolution 12−bit, on−chip
Responsivity 0.44 V/lux-sec (550nm)
Dynamic range 62.7dB
SNRMAX 37.4dB
Frame Rate9M resolution (3488H x 2616V):
9.7 fps
Preview VGA mode
640H x 480V with 2X skip and 2X bin: 56.8 fps (full power), 50 fps (low power)

Block Diagram

Application 

  • Digital video cameras 
  • Digital still cameras 
  • Industrial camera 
  • Medical camera 
  • Microscopy camera 
  • UAV camera

Order Information

Check the camera breakout from the product page.

Articles

Was this article helpful to you? Yes No